Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Hydration

Widefoot CargoMount
$48.00
Low-profile Cargo Rack Made in USA The original one-piece aluminum cargo carrier. The Widefoot CargoMount™ allows you to securely strap down a variety of bottles, smaller bags, and cylindrical objects to your bike frame or fork. Made of sturdy and lightweight aluminum, and available in Silver Anodized or Black Coated finish. Our unique 7-slot configuration allows you to fine tune your installation at multiple positions on frames and forks with three-bolt mounting systems. Weighing just 68g, it’s among the lightest cargo cages on the market. Note: Mint, Orange, and Purple CargoMounts have been discontinued Installation and Use: 1. Install by bolting onto sets of three mounting bosses. 2. Use hose clamps and other non-bolt methods at your own risk. 3. Thread two straps (not included) through, then around the outside of the CargoMount. 4. Wrap straps around your cargo, and securely fasten according to your straps instructions. Keep loose ends away from moving parts. Mounting hardware is not included. Straps are not included. Installation by a professional bicycle mechanic is recommended. Consult with your bicycle manufacturer if you have questions about compatibility with your bike frame or fork. Use of two straps is recommended. Always ensure your CargoMount, straps, and cargo are securely fastened and not interfering with moving parts before riding.
Widefoot LiterCage
$32.00
Stainless Steel Cage for Large Bottles Made in USA The Widefoot LiterCage™ allows you to carry your favorite bottles on your bike. Compatible with a variety of 3.5? (89mm) diameter water bottles including those made by Nalgene and other top brands. Our unique 7-slot mounting bracket allows attachment at multiple positions on frames and forks with two-bolt, or three-bolt mounting systems. Full stainless steel construction provides durability, corrosion-resistance, and a secure hold. Choose from two finishes: Polished or Black. As with any type of coating, our Black option will show some wear over time in locations where bottles contact the cage. For more information on installation and use, see Description below. A list of compatible bottles is available in the LiterCage Fit Guide. Note: Mint, Orange, and Purple have been discontinued Installation and Use: 1. Install by bolting onto sets of two or three mounting bosses to carry bottles that are approximately 3.5? (89mm) in diameter. 2. Use hose clamps and other non-bolt methods at your own risk. 3. Taller or heavier bottles, rougher terrain, or non-upright installation may warrant the use of a strap. Mounting hardware, bottles, and straps are not included. Installation by a professional bicycle mechanic is recommended. Consult with your bicycle manufacturer if you have questions about compatibility with your bike frame or fork. Always ensure your cage and bottle are secure before riding, and keep loose ends away from moving parts.
Problem Solvers Bottle Cage Height Adapter
$9.99
On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061
Portland Design Works Bar-ista Coffee Cup Holder
$19.00
Sometimes you don't want to leave your cup of joe at home. Enter: Portland Design Works' Bar-ista to keep your morning beverage within easy reach. This handy accessory fits most travel mugs and attaches to 26.0mm handlebars. Drop in your travel mug (with a good lid to avoid splash stains) and enjoy the ride. - Constructed of 5052 alloy and lined with rubber to better grip travel mugs - Weight: 71g (2.5 ounces) - Dimensions: 8cm (3.125") diameter at top, tapering to 7.5cm (2.95") at bottom - Lifetime PDWarranty
Portland Design Works Sparrow Cage
$19.00 - $25.00
The Portland Design Works Sparrow Cage is made from a single sheet of lightweight 5052 alloy. The Sparrow's wings fold in to securely cradle your water bottle and the cut outs help keep the cage light. Get a Sparrow and make your ride fly. - Constructed of 5052 alloy - Includes two stainless bolts for installation  - Weight: 57g (2oz) - Lifetime PDWarranty
Planet Bike PB Cage Water Bottle Cage
$5.99
Planet Bike's PB Cage holds your bottle securely with sturdy 6.2mm-diameter 6061-aluminum tubing and comes in a variety of colors so you can coordinate your bike down to the last detail.
Park Tool Coffee Mug
$11.49
Show your love for bicycles, tools and all things Park Tool with their Coffee Mug. Perfect for impressing your guests with a cool-logo cup, or fueling yourself before a fun wrenching session, a few of these mugs should be in every kitchen cabinet and bicycle workshop, too!
Osprey Kitsuma 3
$64.99
Not every ride calls for a big pack and lots of gear. When you're looking to get in a quick ride that requires water and not much else, the women's-specific Kitsuma 3 is a quality and functional inconspicuous solution to your hydration needs. Low-profile shoulder straps give way to rolled-soft edges that offer excellent fit and stability. Stay cool and dry, even on hot and steamy days, with a lightweight AirScape airmesh backpanel that also grants full body movement. An independent hydration sleeve holds an included 2.5-liter reservoir with a bite valve that attaches to your sternum strap via magnet. Store small easy-access items, like energy bars and arm warmers, in the side mesh pockets and attach a rear bike light on the designated loop should you pedal close to sunset. LOW-PROFILE CARRY - When carrying water and a few essentials are all that's needed, the Katari/Kitsuma provides a lightweight option that rides close to your back for stability on any trail. RESERVOIR INCLUDED - An Osprey Hydraulics LT 1.5L or 2.5L reservoir keeps you hydrated all day long and stores in an external hydration compartment to protect pack contents from accidental spills. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Ridged airmesh-covered foam with center air channel for excellent ventilation BIOSTRETCH HARNESS - Lightweight, ridged airmesh harness provides ventilated comfort - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability - Women's-specific fit and sizing - Low-profile design with AirScape backpanel and rolled, soft-edged harness for maximum comfort - Dedicated hydration compartment with included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Magnetic sternum-strap bite-valve attachment - Zippered, scratch-free heat-embossed slash pocket - Loop for blinky-light attachment (light not included) - Dual-stretch-mesh side pockets
Osprey Seral 7
$89.99
Prefer an off-the-back hydration solution instead of an over-the-shoulder pack? The Seral 7 lumbar pack was made for you. Featuring an included 1.5-liter lumbar reservoir and magnetic bite valve that attaches to the hipbelt for easy access. Some lumbar packs have a tendency to creep around while you ride, we promise this one won't. Compression straps pull the pack into your lower back and wrap around your hips for supreme stability, even over technical terrain. A zippered main compartment and hipbelt pockets fit your spare tube, patch kit, CO2 inflator and more. Lumbar Carry For riders who require hydration or gear storage while riding, but prefer the off-the-back carry and minimalism provided by lumbar packs. Ride Stability Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. This is created by a breathable airmesh wrap hipbelt that contours over the hipbone, Osprey's ErgoPull cross-body waist strap closure system that pulls the pack into the lumbar and side compression straps that pull the load close to your body, providing the most comfortable, secure and stable carry. Included Reservoir A dedicated hydration compartment stores an included 1.5L lumbar reservoir for short to medium rides and compresses for stable carry, while the hose magnet attaches to the bite valve for easy access while riding. Sustainable Materials Constructed with PFC-free recycled bluesign-approved nylon; a sustainable build that's tough and durable to endure years of riding. - AirScape backpanel with contouring lumbar wrap provides maximum stability - Included Osprey Hydraulics 1.5 L lumbar reservoir by Hydrapak - Magnetic hipbelt bite valve attachment - Large zippered main compartment with reservoir sleeve - Easily accessible zippered front pocket with internal tool organization - Dual zippered hipbelt pockets - Blinker light attachment with reflective graphic - Extra-thick ridged foam with center air channel for excellent ventilation - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit
Osprey Siskin 12
$110.00
Designed to do it all—and hold just enough gear—the Siskin 12 is a mountain biking pack with many of the high-performing features you'd expect from Osprey. The mesh-covered AirScape backpanel provides excellent ventilation and maximum range of motion—go ahead, get sendy. A LidLock attachment on the front of the pack can store a standard size helmet while side compression straps expand to hold a full face helmet. The main U-zip compartment houses organization pockets for your bike tools and room for a layer, a sandwich, or some light mountain bike padding. Rolled, soft-edge shoulder straps keep the pack stable over technical terrain and ensure no pinching points when full. A dedicated compartment holds an included 2.5-liter reservoir and zippered hipbelt pockets provide easy access to bars during the ride or a bottle opener afterwards. VARIABLE HELMET CARRY - Includes Osprey's LidLock helmet carry for traditional helmets and front panel upper compression straps for full face helmets. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment to protect pack contents from accidental spills. MOUNTAIN BIKE-FOCUSED FEATURES - Multi-pocketed tool organization and large bucket main compartment stores and protects all your essential gear. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. FEATURES - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak with direct-zip access - Magnetic sternum strap bite valve attachment - Dual upper side compression straps double as a full face helmet carry - Full front panel U-zip to main compartment and tool organization - Front panel shove-it pocket - LidLock helmet attachment - Blinker light attachment - Zippered hipbelt pockets - Zippered scratch-free, heat-embossed slash pocket AIRSCAPE SUSPENSION - Atilon foam framesheet enables dynamic body movement and evenly distrubutes load across the entire backpanel AIRSCAPE BACKPANEL - Mesh-covered extra deep ridged foam with center air channel allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Soft breathable spacermesh contact surfaces and die-cut foam ventilation - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability
Osprey Siskin 8
$99.99
When a pack that holds only water is too small and a pack that holds everything is too big, the Siskin 8 is just right. A high-performing mountain biking pack that provides stability and comfort on the gnarliest of trails, the Siskin allows you to bring just what you need (and nothing more) on your ride. A direct-access zip path leads to an included 2.5-liter reservoir, and a U-zip main compartment opens wide to stuff a spare tube, flat repair tools, and your PB&J inside. A mesh-covered foam backpanel offers ventilation and allows for lively movement while keeping your pack close to your body, even when you're riding loose. The front of the pack features a LidLock attachment point for a standard-size helmet, while side compression straps expand to fit a full face. VARIABLE HELMET CARRY - Includes Osprey's LidLock helmet carry for traditional helmets and front panel upper compression straps for full face helmets. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment to protect pack contents from accidental spills. MOUNTAIN BIKE-FOCUSED FEATURES - Multi-pocketed tool organization and large bucket main compartment stores and protects all your essential gear. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. FEATURES - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak with direct-zip access - Magnetic sternum strap bite valve attachment - Dual upper side compression straps double as a full face helmet carry - Full front panel U-zip to main compartment and tool organization - Front panel shove-it pocket - LidLock helmet attachment - Blinker light attachment - Zippered hipbelt pockets - Zippered scratch-free, heat-embossed slash pocket AIRSCAPE SUSPENSION - Atilon foam framesheet enables dynamic body movement and evenly distrubutes load across the entire backpanel AIRSCAPE BACKPANEL - Mesh-covered extra deep ridged foam with center air channel allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Soft breathable spacermesh contact surfaces and die-cut foam ventilation - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability
MSW AC-100 Basic Water Bottle Cage
$9.99 - $10.00
- Constructed using a 6mm aluminum rod - Embossed MSW logo
MSW PC-150 Composite Water Bottle Cage
$9.00
The MSW PC-150 composite water bottle cages are a great value, providing easy use and are less likely to scratch the finish on most water bottles. - Composite construction - Does not include mounting bolts - Embossed MSW logo
MSW Ride and Repair Kit w/Water Bottle Cage
$44.99
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit has a water bottle cage as well as everything needed for common road-side fixes: an eight-piece multi-tool, three tire levers, CO2 inflator & cartridges. - Lightweight composite water-bottle cage - Three MSW tire levers - Eight-piece flat pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges
Lezyne Flow Cage SL
$15.99
Lezyne's Flow Cage SL is made from a fiber reinforced Composite Matrix material for low weight, strength, and reliability. And, it loads from the side for added convenience — especially on compact frames or full suspension bikes! It is available in both left-side and right-side loading configurations.
Lezyne Flow Storage Adapter
$54.99
Integrated stainless steel storage bracket that fits under a bottle cage. Holds included Twin Speed Drive CO2 head, V5 multi tool, two CO2 cartridges and two Matrix levers. Not available with CO2 cartridges in all countries. Weight: 95g /311g Loaded
Evo Ocoee Bottle Cage
$12.99
- Durable and lightweight alloy - Fits 25.4mm handlebars (22.2mm with included shims)
Elite L'Eroica Bottle Cage
$24.95 - $49.99
Classic Design: the handlebar-mounted aluminum bottle cage has the same classical shape as historic ones. Finish: the bottle cage is made in opaque, satin-finished aluminum where the EROICA logo is carved, for an instantly recognizable product. Firm grip on the bottle: the bottle cage features a lever-closing system that holds the bottle steadily even on the dirt roads where many classic cycling competitions are still being held. It can also be adjusted based on the bottle diameter, so you can use bottles that range from 70 to 78mm in diameter. Easy to use: it's pre-assembled, needs no specific tools and includes all the screws you need to install it on the bicycle. Available in the single (one bottle) or double (two bottles) versions
Elite Skekane
$46.99 - $59.99
Kit for fitting under the saddle, for carrying bottles and cycling accessories. - Includes mounting bracket for 2 CO2 refills, 2 straps, stainless steel screws - Lightweight and durable in aluminium - Aerodynamic, adaptable and adjustable according to needs - Compatible with all normal standard metal and carbon saddle rails
CamelBak Podium Chill 21oz
$14.00 - $16.00
With double-walled construction to keep water cold twice as long as other bottles, the insulated CamelBak Podium Chill is the best-of-the-best for delivering cold, consistent cycling hydration. Features like optimized cage fit and improved cleanability continue to make this bottle a favorite among professionals and recreational users alike. It is and always has been 100% free of BPA, BPS and BPF. - Double-Walled Construction: Keeps water cold twice as long - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.
CamelBak Podium Chill 24oz
$16.00 - $17.00
With double-walled construction to keep water cold twice as long as other bottles, the insulated CamelBak Podium Chill is the best-of-the-best for delivering cold, consistent cycling hydration. Features like optimized cage fit and improved cleanability continue to make this bottle a favorite among professionals and recreational users alike. It is and always has been 100% free of BPA, BPS and BPF. - Double-Walled Construction: Keeps water cold twice as long - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.
evoc Drink Bottle
$20.95
- High water flow TPR valve - Leak proof seal for safe transport - Phthalate and PVC free
evoc E-Ride 12
$150.45
- Strap attachment System for secure charger storage - Separate compartment for control display - Comfortable Air Pad carrying System - Air Circulation System for perfect ventilation - Material: N 100 D Shadow Box, 3D Air Mesh - Volume: 12L - Size: 24 x 47 x 10cm (9.4 x 18.5 x 3.4") - Weight: 620g (1.4lbs)
evoc FR Enduro
$180.00 - $190.45
The EVOC FR ENDURO backpack combines 16 liters of capacity with an integrated back protector. This makes the pack the perfect blend for enduro races and bike tours. - Back protector is removable and replaceable - Attachment system for: helmet (XC, full face), protection gear (stowable) - Tool compartment (separate, wide swing-open) - Accommodates hydration systems up to 3L (not included)
evoc FR Lite Race
$170.00 - $210.45
The EVOC FR Lite Race protector backpack has been specially designed for enduro bike races. Low weight and a completely ventilated carrying system are the highlights of this race backpack. (With an optional bladder, you also have the perfect hydration pack.) - Back protector is removable and replaceable - Attachment system for: helmet (XC, full face) - Quick-access tool compartment - Hip belt pockets - Nutrition pocket on the right shoulder strap - Accommodates hydration systems up to 3L (not included)
evoc Hip Pack 3 (No Bladder)
$98.45
- Air Flow Contact System offers perfect back ventilation - Separate and quick-access tool compartment - Material: N 210D Ripstop HD, 3D Air Mesh - Volume: 3L - Size: 28 x 18 x 8cm (11 x 7.1 x 3.1") - Weight: 350g (0.8lbs)
evoc Hip Pack 3L + 1.5L Bladder
$136.45
Offering optimized back ventilation, the Hip Pack 3L is perfect for bike rides with little equipment. Thanks to the Venti Flap system you can individually adjust the distance of the fannypack to your back and the ventilation along the back panel. With the Bladder 1.5L, you also have the perfect, small hydration pack. - Air Flow Contact System offers perfect back ventilation - Separate and quick-access tool compartment - 1.5L Hydration bladder included
evoc Hydration Bladder
$50.95
- Leak-proof and easy to fill with SLIDE SEAL - PLUG-N-PLAY allows quick removal of the hose - Free from BPA and PVC
evoc Hydration Bladder 2
$49.95
The durable Hydration Bladder 2 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%. - Can be filled with hot or cold water (up to 60°C) - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Volume: 2L - Weight: 130g - Measures: 17 x 32 x 1cm
evoc Hydro Pro 1.5 + 1.5L Bladder
$140.45
- 1.5-liter bladder included - 2 nutrition compartments for bars or 150 ml liquid/gel (each) - 2 chest pockets for gear you need to have quick access to while riding - Material: N210 D Taffeta, 3D Air Mesh, Airo Flex - Volume: 1.5L - Size: 23 x 33 x 2cm (9.1 x 13 x 0.7") - Weight: 230g (0.5lbs)
Page 1 of 12 Next page