Headlights

**** kLite products are available for order, but we do not keep them on hand in store due to their cost. You can order online for pickup in store, and we will get them shipped in from our supplier as soon as possible (usually 3-4 days). *** The ultimate endurance racing electron kit! Just add a Son Delux dynamo hub, and you're ready for an extended transcontinental adventure. kLite--the leader and primary innovator in self-supported adventure racing--has come up with the ultimate long distance, high speed, self-supported lighting / charging kit. This kit includes an ultra low drag triple beam light, a dual USB charger, and an “expedition rated” USB always on lighting switched wire loom designed specifically for the SON delux dynamo hub. This setup allows you to use the light while simultaneously charging your GPS and running a low draw kLite Qube rear flashers, or switch off the light and charge a high draw appliance like a mobile phone or battery.

The ultimate endurance racing / touring electron kit! Just add a dynamo hub, and you're ready for an extended off-the-grid adventure. kLite--the leader and primary innovator in self-supported adventure racing--has outdone itself with this latest product setup. 1,300 lumens, waterproof, and vibration proof. Just choose the type of dynamo hub connection on your adventure rig and this kit has everything you need to get off the grid, light up the trail ahead, and simultaneously charge two of your critical devices. ULTRA MTB--Wide 1,300 Lumen Triple Beam: 2x Flood Optics, 1x Spot Optic. Intended for MTB singletrack riding, the ULTRA MTB uses diffused lenses on the two outside lamps to provide 180 degrees of lighting, and the center lamp projects out to illuminate the trail ahead of the rider. On twisty singletrack, illuminating your immediate surroundings is critical—and this is where the “down the road” illumination provided by traditional dynamo lamps fall short. Below 13kph / 8mph, the ULTRA V2 boosts the power from the dynamo, providing dramatically more illumination than any other dynamo light at slower speeds. At 13kph / 8mph, the center spot kicks on to provide even more—with a boost of down the trail illumination. Many say that the combination of the wide and spot beams on this lamp allow them to leave their helmet mounted lights at home, reducing overall weight and complexity. The configuration also helps prevent light flare off near-to-the-trail obstacles--a factor which can lead to eye strain. The unit also has capacitive storage which provides wide flood light in low power mode for ~10 minutes without incoming power – ideal for hike-a-bike, on-the-trail maintenance, and a quick camp setup. When coupled with the kLite USB charger and kLite wiring loom, this unit provides a turnkey ultra-endurance platform designed to keep your electronics charged and you on the trail. Ships with a handlebar mount; designed for use with the kLite dynamo wiring loom and any current dynamo hub. kLITE DUAL USB CHARGER. This weatherproof dual USB charger accessory converts the varying load of alternating current thrown off by your dynamo hub into two steady streams of 5V USB DC charging. A red LED lamp assures you that magic is happening and electrons are actually making their way from your hub into your USB device. Cleverly designed and small enough to fit wherever you feel the best spot is for your charging excellence, including inside of your bikepacking bags! (Dimensions: 8cm x 3.5cm x 2.5cm, inclusive of ziptie mounting holes). The mounting options are virtually endless - I have mine mounted upside down to the side of the head tube with three zip ties, providing easy access from the handlebars and to charging accessories such as the kLite QUBE rear blinker and GPS / Phone accessories on the handlebar. kLITE "ALWAYS ON" DYNAMO WIRE LOOM AND SWITCH. The trail lamp and dual USB charger are connected by an "expedition rated" wire loom that provides a positive, waterproof connection to your dynamo hub. Toggle the switch on and you have lights and USB charging, toggle the switch off, and the lights are off and you have USB charging only. This "always on" USB functionality is perfect for endurance riders who need constant GPS charging and for those interested in the kLite QUBE--a flashing rear light accessory available separately. The kit provides the following elements: kLite ULTRA v2 Lamp- Wide Beam-MTB / Singletrack Version (133g) Dual USB charger with LED indicator lamp (68g) Pro "always on" wiring harness with lamp "on / off" switch - indicate dynamo connection type preference (58g) Handlebar / Fork lamp bracket and mounting hardware (67g) Zip ties to connect the wiring loom and USB charger to your bike

Boasting 4200 lumens and 6 CREE LEDs at 6000k; the Pro 4200 Enduro offers 4 brightness settings and a daylight flash mode that are factory-tuned to optimize riding in any condition. And, a long-lasting 8-cell battery that doubles as a USB portable charger makes this lighting system perfect for long night rides, high speed MTB descents, or backcountry touring. - Ultra bright 4200 lumen output - 8 Cell Li-Ion battery, doubles as a USB portable charger - Remote switch for ease of operation - The preferred light for serious MTB riders - Highly durable light housing with Dupont Fiberglass reinforced nylon - Perfect for handlebar mounting - FL 1 Standard IP64, dust and water-resistant - 4 steady light modes and 1 daylight flash - Custom 3 cone dual-beam reflectors utilizing 6 CREE LEDs at 6000k - Convenient nylon storage pouch Warranty: - The Pro 4200 Enduro Remote is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. System Includes: - LED Headlamp with Remote Switch - Li-Ion Battery/USB Portable Charger - Handlebar Mount - Fits up to 35mm - AC Adapter - Nylon Storage Pouch

Seca 2500 is the world's ultimate trail light - its reliability, durable design, and trail-optimized beam pattern is unmatched. The newest generation of Seca features a robust waterproof construction, updated optics, enhanced firmware, and GoPro mount compatibility. Featuring: - 2500 Lumen output certified to the FL-1 Standard - IP67 Waterproof Rating (Submersible to 1 Meter) - Advanced electronics with regulated output to keep lumens steady through entire runtime - A 4 LED array using the best CREE LEDs and enhanced firmware. - Custom engineered reflector/optics diffuses the bottom LED to cover an ultra-wide spread down in front and focuses the top LEDs to penetrate the darkness and maximize riders' depth perception - Illuminated power button with enhanced engagement designed specifically for gloves - GoPro mount compatibility Included: - Handlebar mount, GoPro mount, helmet mount, 6 Cell battery, battery strap, Mini L 1.5 Charger (US/JP, UK, EU, AUS compatible)

3 LED e-bike light, the Flex is our e-mtb orientated light with a possible output of up to 3300 lumens in a lightweight and compact unit. Powered via the battery/motor system, this allows you to do away with the traditional onboard battery system. The Flex utilises our REFLEX ++ technology for smarter battery management, and is fitted with wired remote for easy mode changes. Fitment is from a new single sided reinforced nylon bracket, this allows for central mounting position on the bike.

Seca 2000 builds on the world’s most popular trail light family in a cost-effective solution that is reliable, durable, and features a trail-optimized beam pattern that is unmatched in the market. Robust waterproof construction, custom optics, enhanced firmware, and GoPro mount compatibility further the Seca’s reputation. The 2000 Race comes standard with the lightweight 3-cell battery pack that is perfect for the after-work ride. Features - 2000 Lumen output certified to the FL-1 Standard - Premium illumination from a 4 LED array with industry leading CREE LEDs - Custom engineered reflector/optics diffuses flood LED to provide ultra-wide beam pattern and focuses spot LEDs to maximize forward visibility - Advanced electronics with custom firmware keeps lumen output from sudden drops - Additional ‘Race Mode’ feature enables riders to conveniently toggle between high and medium output - Illuminated power button with low-runtime indicator and enhanced tactile engagement specifically for gloves - Waterproof design provides all-weather reliability (submersible up to 1 meter with battery connected) - Multiple mounting options include helmet, handlebar, and GoPro interface Specifications - Lumens: 2000 (high), 1000 (medium), 500 (low), 500 (pulse) - Runtime: 90 min (high), 180 min (medium), 360 min (low), 720 min (pulse) - Beam Angle: 25° (spot) - Charge Time: 150 min

With a 2200 lumen output, you'll be sure to see every trail line, root, rut or rock with relative ease. The Pro 2200 Enduro spec includes an 8 cell battery for double the run times, when compared to the 2200 Race spec. The four steady light modes, two steady flashes and S.O.S. give you seven options for any adventure you decide upon. FEATURES - Lumen Output: 2200 - 7 Modes with Run Times: 3:00 – 50:00hrs - Charge Time: 5:00hrs - Weight: 702g - Battery: Li-Ion - 8 Step Fuel Gauge - Handlebar and Helmet Mountable - Water / Dust Resistant IP64 Rated RUN TIMES Low—12:00h at 500 Lumens Medium—6:00h at 800 Lumens High—3:00h at 2200 Lumens Flash—50:00h at 730 Lumens Beacon—50:00h at 730 Lumens S.O.S.—50:00h at 730 Lumens Race—50:00h at 250 Lumens

***Available for order; we do not stock these in the store just yet*** E3 Triple features wide illumination pattern providing outstanding visibility in every surrounding. AL-6061 case, 130g Wiring included, powered by standard dynamos (dynamo not included) Ideal for 24-hour MTB racing, randonneuring, cyclocross training, and general off-road night riding Includes Multi-mount which is a versatile dual-pivot, height-adjustable arm that mounts to hole in fork crown Internal capacitor provides up to 7-minute run time while sitting still Best used with Supernova tail lights

The Pro 2200 boasts one of the category's best power-to-weight ratios. With 2200 lumens of light output, using 3 CREE LEDs- set into a NiteRider custom reflector, guarantees to set the darkest bike trail ablaze. It features an accurate eight-step fuel gauge, keeping the rider informed of battery levels at all times. These attributes make the Pro 2200 the "go to" light among the world's top athletes and enthusiasts alike. - Compact and lightweight, perfect for race inspired riders - Custom 3 cone reflector producing brilliant trail illumination - 3 – class leading CREE LEDs at 6000k - Rugged design with Dupont Fiberglass reinforced nylon housings - Handlebar mount fits up to 35mm diameter bars - Helmet mountable - Lightweight 4 cell Li-Ion battery - Easily check battery power levels with the 8 step fuel gauge - FL 1 Standard IP64, dust and water-resistant - Convenient nylon storage pouch WARRANTY The Pro 2200 Race is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Headlamp - Li-Ion Battery - Helmet Mount - Handlebar Mount – Fits up to 35mm - 36" Extension Cable - AC Adapter - Nylon Storage Pouch

This single e-bike light is an extremely light and compact unit, making it perfect for both fast road cycling and commuting. It automatically adapts to 6V or 12V voltage so it is compatible with most motors including Bosch, Brose, Shimano, and Yamaha systems. - Up to 1400 lumens depending on battery and motor combination

PWR Mountain is a modular bike light for trail and mountain biking, but it's not just another bike light. Not only is it a high-power headlight, but a modular system that includes a lighthead for other PWR bike and camping lights, plus a PWR Bank to charge devices or to power any product in the PWR range. The PWR Mountain outputs 2000 lumens of light, uses a circular beam for flood lighting obstacles from unpredictable angles, and can be mounted both on the handlebar or your helmet using the helmet/bar extension mount. It incorporates twist mode operation (turn the light on and off twisting the lighthead—no buttons) and gives you the option to program your brightness and runtime through the ModeMaker app. - Power bank: 10,000 mAh, compatible with the small, medium and large lightheads - CNC-machined anodized aluminum body with ridged heat fins - 4 LEDs on light display remaining charge - USB Rechargeable Li-ion battery. - Thermal management automatically regulates the light output for optimum performance. - Includes: Male-Female USB cable, Side Mount, Spacer, Micro USB Cable - Dimensions: 132x 48mm - Weight: 355g

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB

Lezyne Ebike Super E1000 Headlight: One of the most powerful and advanced StVZO certified e-bike cycling headlights, this light is housed in an expertly machined aluminum body with cooling fins that are engineered to maximize lumen output efficiency. Cutting-edge programming gives this light an innovative high beam/low beam system controlled by a remote switch that lets the user easily toggle between two modes—600 lumens or 1000 lumens—on-the-go via a handlebar mounted button. Thermal management is built into the programming, and it comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Two mounting options are also included—one Composite Matrix front mount and one machined aluminum fork mount. Compatibility: 11 – 15v input, 8.5w LB / 16w HB. Download the manual below for further installation and compatibility details. - 600 lumen with 1000 lumen high beam mode - STVZO optimized lens - 130cm cable - Aluminum fork mount, forward center mount, and hardware

- Supercharged 1:30 to 110 hour run time. - Extremely powerful 2,000 lumens in the most compact and stylish form - Cycling Tuned Optics throws a long range, extra wide beam to cover road and mountain biking. - Daytime visible flashes make you stand out on busy streets - Two-button design lets you fine tune the brightness and flash speeds to your cycling needs. - Expand run times beyond factory default settings by fine tuning the brightness modes and flash speeds. - 9 lighting modes for day and night use - SteadyPulse mode alerts motorists with attention grabbing pulses while its overlapping steady beam constantly lights your way at night - DayLightning flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets. - 252 grams - IP67 water resistant for use in all weather conditions - USB rechargeable with 5 hours recharging time - Designed, engineered, and assembled in the USA.

Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.

The All New NiteRider Lumina Dual 1800 represents the next evolution of our best-selling Lumina headlight into a dual LED set-up that produces a far-reaching beam pattern with extensive peripheral illumination; making it the ideal choice for any riding situation or terrain. The Dual emits an amazing 1800 lumens while in Boost Mode, making it one of the brightest self-contained bicycle lights available today. Simply double tap the power button to set the light to Boost Mode. When in Boost Mode, the power button will illuminate red and blue to notify the user at a glance. The Dual is also equipped with side lighting to increase your visibility day or night. Tested, meeting an IP64 rating; The Dual 1800 is designed to be used in a variety of riding conditions because of its high resistance to water and dust. Its high-strength Dupont Fiberglass reinforced nylon body casing and aluminum heat sink are engineered for extreme resistance to cracking and abrasion. - All New Collimator Lens, distributes a smooth widespread beam pattern - Side lighting for increased visibility day or night - Long lasting 20 hour runtime at 100 lumens in Walk Mode - 5 Light Levels plus 2 Daylight Flash Modes - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Helmet mountable (Helmet Mount sold separately) - Fast 3 hour charge via the included AC power charging adapter - Low battery indicator - Extend your ride time, 6 hour runtime at 350 lumens in Low Mode - Boost Mode indicator, power button will light up red and blue - Boost Mode, double tap power button to unleash maximum LED output at 1800 lumens! - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Dual 1800 is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - Dual LED Head Light - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - AC Power Charging Adapter

- Supercharged 1:15 to 85 hour run time. - Extremely powerful 1,800 lumens in the most compact and stylish form. - Cycling Tuned Optics throws a long range, extra wide beam to cover road and mountain biking - Daytime visible flashes make you stand out on busy streets - Two-button design lets you fine tune the brightness and flash speeds to your cycling needs. - Expand run times beyond factory default settings by fine tuning the brightness modes and flash speeds - 9 lighting modes for day and night use - SteadyPulse mode alerts motorists with attention grabbing pulses while its overlapping steady beam constantly lights your way at night. - DayLightning flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - 252 grams - IP67 water resistant for use in all weather conditions - USB rechargeable with 5 hours recharging time - Designed, engineered, and assembled in the USA

- High-quality PREMIUM design - AWARD-WINNING light distribution technology - Easy-to-use LCD DISPLAY shows various information to the user - Extensive side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 80 LUX - 6 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 3 hrs

Lezyne Ebike Classic Stvzo E800: A highly advanced StVZO certified e-bike cycling headlight. This light is housed in a beautifully machined aluminum body with computerized thermal management to maximize lumen output efficiency. Cutting-edge programming gives this light an innovative high beam/low beam system controlled by a remote switch that lets the user easily toggle between two modes—500 lumens or 800 lumens—on-the-go via a handlebar mounted button. It comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Two mounting options are also included—one Composite Matrix front mount and one machined aluminum fork mount. Compatibility: 11 – 15v input, 7.5w LB / 13w HB. Download the manual below for further installation and compatibility details. - 500 lumen front ebike light with 800 lumen high beam mode - STVZO optimized lens - 130cm cable - Aluminum fork mount

Most dynamo lights are designed mainly for commuting on semi-lit city streets. The high beam doesn't spread too widely for concern the eyes of oncoming traffic. Therefore they may not be ideal for rural areas where you want a wider beam. The beam of the Trail Light is wider to illuminate objects around the direction you are going -- trees, bushes, rocks. – CNC'd 6061 aircraft grade aluminum – 600 lumens – 5v Micro USB port allows charging of devices when bike is moving and light is switched off. Cable not included. – Waterproof IP65 – Capacitor allows light output to continue up to 5 minutes while bike is stopped – On/off switch – Input voltage AC 6V – Output voltage DC 6V Why a Dynamo Light over common battery-powered lights? – No need for batteries or recharging – No worries of forgetting to recharge – No worries of forgetting to bring it on the ride – Less likely to be stolen since there are wires -- No worries of being caught in low light when your ride takes longer than expected

- Supercharged 1:30 to 95 hour run time - Extremely powerful 1,500 lumens in an astonishingly compact and stylish form. - Cycling Tuned Optics throws a long range, extra wide beam to cover road and mountain biking - Daytime visible flashes make you stand out on busy streets. - Two-button design lets you fine tune the brightness and flash speeds to your cycling needs. - Expand run times beyond factory default settings by fine tuning the brightness modes and flash speeds. - 9 lighting modes for day and night use - SteadyPulse mode alerts motorists with attention grabbing pulses while its overlapping steady beam constantly lights your way at night - DayLightning flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - 252 grams - IP67 water resistant for use in all weather conditions - USB rechargeable with 5 hours recharging time - Designed, engineered, and assembled in the USA.

PWR Trail is a modular bike light—but it's not JUST another bike light. Not only is it a high-powered bike light, but simply take the product apart and you have much more. It's a lighthead and a PWR Bank to charge devices that is also the battery for all products in the PWR range. Battery Indicator Hate it when you run out of battery with no warning? That'll never happen with PWR Trail, with 4 built-in battery indicator lights. Tap the bottom of the light to activate the battery indicator. 4 lights = fully charged, 2 lights = half charge, etc. Easy to Mount and Use This light can be mounted on top or below your handlebars, directly under your Garmin, or on your helmet. It comes with a side mount and shim that fits handlebars 22.2 – 38.1mm diameter. Once mounted, using PWR Trail is a breeze. It's a simple twist-head operation to turn the light on & off and to scroll through light modes. Charge Your Devices Press the red button to release the lighthead, and use the PWR bank to charge your phone, GoPro, cycle computer, or other devices. One hour of riding @1000 lumens means you can top up the charge on your iPhone by 75%. Charge your PWR Trail using the included micro USB cable, charge time is 3.5 hours. Wide Beam and Customisable Modes PWR Trail outputs a max of 1100 lumens and can run for up to 300 hours on Eco Flash Mode. Its elliptical beam gives broad, bright road coverage. It comes with 6 pre-programmed modes, and you can program the light to suit your needs with Modemaker. You can control brightness, adjust runtimes, and add new light modes. - Dimensions: H: 128mm x W: 35mm x L: 35mm - Weight: 230g - Lumens: 1100

The E-Bike Orbis StVZO E600 is an advanced StVZO certified e-bike cycling front light delivering 600 lumens of output. This light is housed in a die-cast and CNC-Machined Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. The Orbis StVZO E600 offers Daytime Running Light mode as well as an intelligent 'Thermal Protection Safety Feature' which automatically reduces light output for safety and efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and CNC Machined Aluminum E-bike Mega Mount are included. E-Bike compatibility: 10.5 – 13.5V input, 8.5W Low Beam / 13W Daytime Running Lights. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - 600 lumens - StVZO-Optimized lens - Daytime running lights (ECE R87) - Die cast and CNC-machined aluminum body with optimized heat-dissipating design - Includes CNC Machined Aluminum E-bike Mega Mount - Thermal Protection Safety Feature: Auto-reduces light output for safety and efficiency - Rigorously tested to IPX7 Waterproofing standards - E-bike compatible 10.5 – 13.5V input, 8.5W LB / 13W DRL - Versatile E-bike system compatibility - 130cm power cable with BES3 BOSCH connector included

SMARTER VISION Aside from outstanding lumen capacity and industry-leading usage time, the Recon HL1100 monitors ambient light to change output accordingly, helping to save battery power for when you need it. Shine brighter, run longer and work smarter. FEATURES - Smart Mode light sensor monitors ambient light to adjust light output accordingly - ANSI certified lumens and run time - Focused optics with side light design for over 270-degrees of visibility - Heat-dissipating CNC-machined aluminum casing - Power status indicator alerts remaining run-time before powering off - Includes adjustable GoPro mount SPECIFICATIONS - Size: 103x30x29 mm - Weight: 107g without mount - Colors: Black - Output: 1100 lumens - Runtime: High (1100LM) 1.5hrs, Middle 3.5hrs (500LM), Low 7hrs (275LM), Smart (100LM>275 LM with flash output in Day) 36hrs; (500LM with steady output at Night) 3.5hrs, Flash (100 LM) 33hrs - Battery: Li-Ion polymer battery (3500mAh) - Water resistance: IPX6 - Certifications: ANSI-Standard FL-1

Featuring 800 lumens of crystal-clear illumination, the Lite Pro 800 Switch (High Volt) e-bike cycling light maximizes usable output with its enhanced Maximum Optical Reflection (MOR) lens while a compact CNC-machined aluminum body is equipped with cooling fins to maximize heat dissipation. Compatible with higher-voltage e-bike inputs (12-48v), the Lite Pro draws 8 watts during operation and easily plugs into batteries from top makers including Bosch, Shimano, and Yamaha. An integrated remote switch simplifies operation while the inclusion of both an e-bike stem mount and aluminum CNC fork mount maximize the light's versatility. A 130cm power cable is included. - Max Lumens: 800 - Weight: 173g

Topeak WhiteLite 800 BT is a high-powered 800-lumen front light with four brightness levels. USB rechargeable with Bluetooth 5.0 enabled wireless control and features a built-in remote control button for compatible rear light and can also be wirelessly controlled by TetraBand BT. The Dual Zone refractor lens allows clear near and far visibility by focusing the main beam downward to prevent blinding pedestrians or oncoming traffic. Optical enhancements increase side visibility for safety on your night rides. Included handlebar mount and adapters provide mounting flexibility. - 5 modes (High 80 lm - 2.5hrs / Middle 40 lm - 5 hr / Low 20 lm - 6 hr / Blink 30 lm - 20 hr / Pulse 50 lm - 40 hr) - Cree XP-L2 LED provides up to 800 lumens - Dual zone refractor lens, low battery indicator

Garmin Varia UT800 Meet the smart headlight that shines brighter for longer - High-intensity cycling headlight for urban and trail use that’s visible in daylight from more than 1 mile (1.6km) away - Projects a steady blast of 800 lumens for up to 1.5 hours - Automatically adjusts to ambient light conditions, speed and ride profile to extend battery life - Works independently or pairs with compatible Edge cycling computers to automatically turn lights on or off, control brightness and more - Offers 5 light modes, including high, medium, low, night flash and day flash Specs: - Dimensions (LxWxH): 3.8" x 1.3" x 1.2" (96.6mm x 33.5mm x 29.7mm); 1.8" with flange (44.7mm with flange) - Weight: 4.6oz (130.0g) - Battery life: 1.5 hours, high; 3.0 hours, medium; 6.0 hours, low; 25.0 hours, day flash; 6.0 hours, night flash - Lumens: 800 - CREE LED: yes - Degrees of visibility: 270 degrees - Visibility distance: 1 mile (1.6km) - Water rating: IPX7

Highly advanced StvZO-certified e-bike cycling front light delivering 550 lumens of output. The E-Bike Fusion StVZO E550 is housed in a CNC-Machined and Bead-Blasted Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and our e-bike center mount are included. E-Bike compatibility: 10.5 – 13.5V input, Max 9W. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you.

Highly advanced StvZO-certified e-bike cycling front light delivering 550 lumens of output. The E-Bike Fusion StVZO E550 is housed in a CNC-Machined and Bead-Blasted Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. The sleek and compact form factor of the Fusion Pro StVZO E550 looks great and delivers exceptional performance. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and our 31.8mm e-bike Side Mount are included. E-Bike compatibility: 10.5 – 13.5V input, Max 9W. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you.

The Macro Drive 1400+ throws out a powerful 1400 lumens of output through our Tri-Focus Optics, creating an optimized beam pattern for superior visibility on the trail or road. Its waterproof USB-C charging port and 2A+ fast charging capability allows for convenient recharging(cable not included), while the CNC-machined aluminum construction with cooling fins ensures durability and efficient heat dissipation. A GoPro mount option and compatibility with the Infinite Light Power Pack+, this front light offers versatile mounting choices and extended battery life. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. Choose from seven different output modes, from the attention-grabbing Daytime Flash Mode to the whopping 300-hour runtime Femto Mode, to suit your lighting needs. A versatile and replaceable strap secures it to a variety of handlebar sizes. - Max 1,400 lumens / 300-hour runtime in Femto mode - Max 1,400 lumens / 300-hour runtime in Femto mode - Waterproof USB-C charging port with charge indicator - 2Amp fast charging - CNC-machined aluminum construction with cooling fins - Tri-Focus Optics are brighter with a large wide-angle pattern - Optional GoPro mount available separately - Infinite Light Power Pack+ Compatible for extended run times - IPX7 Waterproofing standards are Rigorously tested - 5200 mAh battery capacity