Lighting

**** kLite products are available for order, but we do not keep them on hand in store due to their cost. You can order online for pickup in store, and we will get them shipped in from our supplier as soon as possible (usually 3-4 days). *** The ultimate endurance racing electron kit! Just add a Son Delux dynamo hub, and you're ready for an extended transcontinental adventure. kLite--the leader and primary innovator in self-supported adventure racing--has come up with the ultimate long distance, high speed, self-supported lighting / charging kit. This kit includes an ultra low drag triple beam light, a dual USB charger, and an “expedition rated” USB always on lighting switched wire loom designed specifically for the SON delux dynamo hub. This setup allows you to use the light while simultaneously charging your GPS and running a low draw kLite Qube rear flashers, or switch off the light and charge a high draw appliance like a mobile phone or battery.

The ultimate endurance racing / touring electron kit! Just add a dynamo hub, and you're ready for an extended off-the-grid adventure. kLite--the leader and primary innovator in self-supported adventure racing--has outdone itself with this latest product setup. 1,300 lumens, waterproof, and vibration proof. Just choose the type of dynamo hub connection on your adventure rig and this kit has everything you need to get off the grid, light up the trail ahead, and simultaneously charge two of your critical devices. ULTRA MTB--Wide 1,300 Lumen Triple Beam: 2x Flood Optics, 1x Spot Optic. Intended for MTB singletrack riding, the ULTRA MTB uses diffused lenses on the two outside lamps to provide 180 degrees of lighting, and the center lamp projects out to illuminate the trail ahead of the rider. On twisty singletrack, illuminating your immediate surroundings is critical—and this is where the “down the road” illumination provided by traditional dynamo lamps fall short. Below 13kph / 8mph, the ULTRA V2 boosts the power from the dynamo, providing dramatically more illumination than any other dynamo light at slower speeds. At 13kph / 8mph, the center spot kicks on to provide even more—with a boost of down the trail illumination. Many say that the combination of the wide and spot beams on this lamp allow them to leave their helmet mounted lights at home, reducing overall weight and complexity. The configuration also helps prevent light flare off near-to-the-trail obstacles--a factor which can lead to eye strain. The unit also has capacitive storage which provides wide flood light in low power mode for ~10 minutes without incoming power – ideal for hike-a-bike, on-the-trail maintenance, and a quick camp setup. When coupled with the kLite USB charger and kLite wiring loom, this unit provides a turnkey ultra-endurance platform designed to keep your electronics charged and you on the trail. Ships with a handlebar mount; designed for use with the kLite dynamo wiring loom and any current dynamo hub. kLITE DUAL USB CHARGER. This weatherproof dual USB charger accessory converts the varying load of alternating current thrown off by your dynamo hub into two steady streams of 5V USB DC charging. A red LED lamp assures you that magic is happening and electrons are actually making their way from your hub into your USB device. Cleverly designed and small enough to fit wherever you feel the best spot is for your charging excellence, including inside of your bikepacking bags! (Dimensions: 8cm x 3.5cm x 2.5cm, inclusive of ziptie mounting holes). The mounting options are virtually endless - I have mine mounted upside down to the side of the head tube with three zip ties, providing easy access from the handlebars and to charging accessories such as the kLite QUBE rear blinker and GPS / Phone accessories on the handlebar. kLITE "ALWAYS ON" DYNAMO WIRE LOOM AND SWITCH. The trail lamp and dual USB charger are connected by an "expedition rated" wire loom that provides a positive, waterproof connection to your dynamo hub. Toggle the switch on and you have lights and USB charging, toggle the switch off, and the lights are off and you have USB charging only. This "always on" USB functionality is perfect for endurance riders who need constant GPS charging and for those interested in the kLite QUBE--a flashing rear light accessory available separately. The kit provides the following elements: kLite ULTRA v2 Lamp- Wide Beam-MTB / Singletrack Version (133g) Dual USB charger with LED indicator lamp (68g) Pro "always on" wiring harness with lamp "on / off" switch - indicate dynamo connection type preference (58g) Handlebar / Fork lamp bracket and mounting hardware (67g) Zip ties to connect the wiring loom and USB charger to your bike

Boasting 4200 lumens and 6 CREE LEDs at 6000k; the Pro 4200 Enduro offers 4 brightness settings and a daylight flash mode that are factory-tuned to optimize riding in any condition. And, a long-lasting 8-cell battery that doubles as a USB portable charger makes this lighting system perfect for long night rides, high speed MTB descents, or backcountry touring. - Ultra bright 4200 lumen output - 8 Cell Li-Ion battery, doubles as a USB portable charger - Remote switch for ease of operation - The preferred light for serious MTB riders - Highly durable light housing with Dupont Fiberglass reinforced nylon - Perfect for handlebar mounting - FL 1 Standard IP64, dust and water-resistant - 4 steady light modes and 1 daylight flash - Custom 3 cone dual-beam reflectors utilizing 6 CREE LEDs at 6000k - Convenient nylon storage pouch Warranty: - The Pro 4200 Enduro Remote is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. System Includes: - LED Headlamp with Remote Switch - Li-Ion Battery/USB Portable Charger - Handlebar Mount - Fits up to 35mm - AC Adapter - Nylon Storage Pouch

It sees what you can't. Varia RCT715 rearview radar with camera and tail light continuously records your ride and automatically saves footage before, during and after events if it detects an incident. The bright tail light makes you more visible to motorists. And Varia RCT715 integrates seamlessly with your Garmin bike computer or the Varia mobile app on your paired compatible smartphone to alert you to traffic as you ride. The app allows for live video viewing for camera setup, plus video transfer so you can replay footage postride. A selection of operation modes lets you flex camera and tail light features to maximize battery life for longer rides.

Seca 2500 is the world's ultimate trail light - its reliability, durable design, and trail-optimized beam pattern is unmatched. The newest generation of Seca features a robust waterproof construction, updated optics, enhanced firmware, and GoPro mount compatibility. Featuring: - 2500 Lumen output certified to the FL-1 Standard - IP67 Waterproof Rating (Submersible to 1 Meter) - Advanced electronics with regulated output to keep lumens steady through entire runtime - A 4 LED array using the best CREE LEDs and enhanced firmware. - Custom engineered reflector/optics diffuses the bottom LED to cover an ultra-wide spread down in front and focuses the top LEDs to penetrate the darkness and maximize riders' depth perception - Illuminated power button with enhanced engagement designed specifically for gloves - GoPro mount compatibility Included: - Handlebar mount, GoPro mount, helmet mount, 6 Cell battery, battery strap, Mini L 1.5 Charger (US/JP, UK, EU, AUS compatible)

3 LED e-bike light, the Flex is our e-mtb orientated light with a possible output of up to 3300 lumens in a lightweight and compact unit. Powered via the battery/motor system, this allows you to do away with the traditional onboard battery system. The Flex utilises our REFLEX ++ technology for smarter battery management, and is fitted with wired remote for easy mode changes. Fitment is from a new single sided reinforced nylon bracket, this allows for central mounting position on the bike.

Seca 2000 builds on the world’s most popular trail light family in a cost-effective solution that is reliable, durable, and features a trail-optimized beam pattern that is unmatched in the market. Robust waterproof construction, custom optics, enhanced firmware, and GoPro mount compatibility further the Seca’s reputation. The 2000 Race comes standard with the lightweight 3-cell battery pack that is perfect for the after-work ride. Features - 2000 Lumen output certified to the FL-1 Standard - Premium illumination from a 4 LED array with industry leading CREE LEDs - Custom engineered reflector/optics diffuses flood LED to provide ultra-wide beam pattern and focuses spot LEDs to maximize forward visibility - Advanced electronics with custom firmware keeps lumen output from sudden drops - Additional ‘Race Mode’ feature enables riders to conveniently toggle between high and medium output - Illuminated power button with low-runtime indicator and enhanced tactile engagement specifically for gloves - Waterproof design provides all-weather reliability (submersible up to 1 meter with battery connected) - Multiple mounting options include helmet, handlebar, and GoPro interface Specifications - Lumens: 2000 (high), 1000 (medium), 500 (low), 500 (pulse) - Runtime: 90 min (high), 180 min (medium), 360 min (low), 720 min (pulse) - Beam Angle: 25° (spot) - Charge Time: 150 min

With a 2200 lumen output, you'll be sure to see every trail line, root, rut or rock with relative ease. The Pro 2200 Enduro spec includes an 8 cell battery for double the run times, when compared to the 2200 Race spec. The four steady light modes, two steady flashes and S.O.S. give you seven options for any adventure you decide upon. FEATURES - Lumen Output: 2200 - 7 Modes with Run Times: 3:00 – 50:00hrs - Charge Time: 5:00hrs - Weight: 702g - Battery: Li-Ion - 8 Step Fuel Gauge - Handlebar and Helmet Mountable - Water / Dust Resistant IP64 Rated RUN TIMES Low—12:00h at 500 Lumens Medium—6:00h at 800 Lumens High—3:00h at 2200 Lumens Flash—50:00h at 730 Lumens Beacon—50:00h at 730 Lumens S.O.S.—50:00h at 730 Lumens Race—50:00h at 250 Lumens

***Available for order; we do not stock these in the store just yet*** E3 Triple features wide illumination pattern providing outstanding visibility in every surrounding. AL-6061 case, 130g Wiring included, powered by standard dynamos (dynamo not included) Ideal for 24-hour MTB racing, randonneuring, cyclocross training, and general off-road night riding Includes Multi-mount which is a versatile dual-pivot, height-adjustable arm that mounts to hole in fork crown Internal capacitor provides up to 7-minute run time while sitting still Best used with Supernova tail lights

The Pro 2200 boasts one of the category's best power-to-weight ratios. With 2200 lumens of light output, using 3 CREE LEDs- set into a NiteRider custom reflector, guarantees to set the darkest bike trail ablaze. It features an accurate eight-step fuel gauge, keeping the rider informed of battery levels at all times. These attributes make the Pro 2200 the "go to" light among the world's top athletes and enthusiasts alike. - Compact and lightweight, perfect for race inspired riders - Custom 3 cone reflector producing brilliant trail illumination - 3 – class leading CREE LEDs at 6000k - Rugged design with Dupont Fiberglass reinforced nylon housings - Handlebar mount fits up to 35mm diameter bars - Helmet mountable - Lightweight 4 cell Li-Ion battery - Easily check battery power levels with the 8 step fuel gauge - FL 1 Standard IP64, dust and water-resistant - Convenient nylon storage pouch WARRANTY The Pro 2200 Race is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Headlamp - Li-Ion Battery - Helmet Mount - Handlebar Mount – Fits up to 35mm - 36" Extension Cable - AC Adapter - Nylon Storage Pouch

This single e-bike light is an extremely light and compact unit, making it perfect for both fast road cycling and commuting. It automatically adapts to 6V or 12V voltage so it is compatible with most motors including Bosch, Brose, Shimano, and Yamaha systems. - Up to 1400 lumens depending on battery and motor combination

PWR Mountain is a modular bike light for trail and mountain biking, but it's not just another bike light. Not only is it a high-power headlight, but a modular system that includes a lighthead for other PWR bike and camping lights, plus a PWR Bank to charge devices or to power any product in the PWR range. The PWR Mountain outputs 2000 lumens of light, uses a circular beam for flood lighting obstacles from unpredictable angles, and can be mounted both on the handlebar or your helmet using the helmet/bar extension mount. It incorporates twist mode operation (turn the light on and off twisting the lighthead—no buttons) and gives you the option to program your brightness and runtime through the ModeMaker app. - Power bank: 10,000 mAh, compatible with the small, medium and large lightheads - CNC-machined anodized aluminum body with ridged heat fins - 4 LEDs on light display remaining charge - USB Rechargeable Li-ion battery. - Thermal management automatically regulates the light output for optimum performance. - Includes: Male-Female USB cable, Side Mount, Spacer, Micro USB Cable - Dimensions: 132x 48mm - Weight: 355g

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB

Stay aware of approaching cars with Varia RTL515 rearview radar. It pairs with your Edge bike computer or compatible smartphone to alert you of vehicles approaching from behind up to 153 yards (140 meters) away. When used with your compatible smartphone, the Varia app uses bold graphics — plus tone and vibration alerts — to indicate the position and speed of approaching vehicles. MAXIMUM AWARENESS - Varia RTL515 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. MULTIPLE PAIRING OPTIONS - This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables or the optional radar display unit. WORKS WITH THE VARIA APP - This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — that indicate the position and speed of approaching cars. THIRD-PARTY APP COMPATIBLE - When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts. SUPERIOR VISIBILITY - Alert motorists to your presence as soon as possible with daylight visibility up to 1 mile. COMPACT DESIGN - Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride. PELOTON MODE - Varia RTL515 features multiple modes, including peloton mode, which provides a low-intensity flash that is kind to other cyclists’ eyes when riding in a group. BATTERY LIFE - Time spent charging is not as good as time spent riding. Get up to 16 hours of battery life in day flash mode and up to 6 hours in solid mode. Physical Specifications - Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm) - Weight: 2.5 oz (71.0 g) - Modes: solid, peloton, night flash, day flash - Lumens: 20 solid, 8 peloton, 29 night flash, 65 day flash - Battery life: 6 hours solid, 8 hours peloton, 6 hours night flash, 16 hours day flash - ANT+: Yes - BLE: Yes - Water rating: IPX7 - Viewing angle: 220° In the box: - Varia RTL515 - Mounting Kit - Cables - Documentation

- Supercharged 1:30 to 110 hour run time. - Extremely powerful 2,000 lumens in the most compact and stylish form - Cycling Tuned Optics throws a long range, extra wide beam to cover road and mountain biking. - Daytime visible flashes make you stand out on busy streets - Two-button design lets you fine tune the brightness and flash speeds to your cycling needs. - Expand run times beyond factory default settings by fine tuning the brightness modes and flash speeds. - 9 lighting modes for day and night use - SteadyPulse mode alerts motorists with attention grabbing pulses while its overlapping steady beam constantly lights your way at night - DayLightning flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets. - 252 grams - IP67 water resistant for use in all weather conditions - USB rechargeable with 5 hours recharging time - Designed, engineered, and assembled in the USA.

Looking for the perfect Gravel and Trail companion? Look no further than the PWR Trail 1100, PWR Mount and Blinder V Bolt light set. Putting out an impressive 1100 lumens, the PWR Trail is a part of Knog's modular bike light range, meaning you can swap light heads, batteries, and use the PWR bank to charge any device. Also included, is the PWR Mount, designed to discretely tuck the PWR unit directly under a cycling computer using the GoPro style attachment. The Blinder V Bolt rear light throws out 100 lumens, and features an integrated USB recharging arm, replaceable silicone straps designed to accommodate any tube size. And, did we mention it's fully waterproof? This light set is perfect for anyone looking to ride harder and roam farther.

Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.

The All New NiteRider Lumina Dual 1800 represents the next evolution of our best-selling Lumina headlight into a dual LED set-up that produces a far-reaching beam pattern with extensive peripheral illumination; making it the ideal choice for any riding situation or terrain. The Dual emits an amazing 1800 lumens while in Boost Mode, making it one of the brightest self-contained bicycle lights available today. Simply double tap the power button to set the light to Boost Mode. When in Boost Mode, the power button will illuminate red and blue to notify the user at a glance. The Dual is also equipped with side lighting to increase your visibility day or night. Tested, meeting an IP64 rating; The Dual 1800 is designed to be used in a variety of riding conditions because of its high resistance to water and dust. Its high-strength Dupont Fiberglass reinforced nylon body casing and aluminum heat sink are engineered for extreme resistance to cracking and abrasion. - All New Collimator Lens, distributes a smooth widespread beam pattern - Side lighting for increased visibility day or night - Long lasting 20 hour runtime at 100 lumens in Walk Mode - 5 Light Levels plus 2 Daylight Flash Modes - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Helmet mountable (Helmet Mount sold separately) - Fast 3 hour charge via the included AC power charging adapter - Low battery indicator - Extend your ride time, 6 hour runtime at 350 lumens in Low Mode - Boost Mode indicator, power button will light up red and blue - Boost Mode, double tap power button to unleash maximum LED output at 1800 lumens! - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Dual 1800 is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - Dual LED Head Light - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - AC Power Charging Adapter

CatEyeSYNC - ONE touch control -Turn one light on and all your Sync lights come on. Using Wireless technology, CatEyeSYNC lights provide the ease of synchronizing all lights to operate as one. Check battery levels, customize modes, set brake mode function and synchronize flash pattern preferences using your Smartphone. Simple and superior 360-degree visibility is one touch away with up to 7 lights synced to operate as one. SYNC Core and Kinetic is the combo you need to get SYNCed. With 500 lumens and excellent side visibility, the SYNC Core gives you the power to see and be seen. Can be used alone or – better still – combined with other CatEyeSYNC enabled lights for unparalleled levels of 360-degree visibility, day or night. SYNC Kinetic gives you an extra level of defense with a built-in accelerometer that switches to burst mode as you decelerate. Use alone or in combination with other models in the CatEyeSYNC family for unparalleled levels of 360-degree visibility, day or night. CORE - Compact and lightweight high power rechargeable headlight (500lm) - Excellent daytime visibility in Daytime HyperConstant mode - Superior side visibility - Round beam pattern with OptiCube lens technology - Built-in fast recharging circuit - Li-ion rechargeable battery - USB rechargeable (Micro-USB cable included) - 5 light modes * Charging time: 3-6 hrs - Mode memory function - FlexTight bracket - Optional helmet mount, center fork bracket and out-front bracket 2 available KINETIC - Built-in acceleration sensor for Kinetic mode (Automatically turns on with 50 lumen brightness when bike deceleration is detected) - Excellent daytime visibility in Daytime HyperFlash mode - Group Ride mode eye-friendly to team riders behind - Superior side visibility - OptiCube lens technology - Lithium Polymer rechargeable battery - USB rechargeable (Micro-USB cable included) - 6 modes *Charging time: 2.5h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low)

Blinder 1300 Front: A powerful front light with multiple mounting options, long lasting battery life and a compact & lightweight form. - Produces a powerful 1300 lumen road focused beam - Provides quality illumination up to 120m - Industry leading battery tech provides 1.5 hrs runtime on full brightness - Up to 120 hours runtime on Eco flash mode - Includes two mounts; a go-pro style attachment for mounting under a computer and a tough rubber strap for the handlebar. - Pre-programmed with 6 light modes to suit all conditions - USB-C rechargeable (cable not supplied) - 100% waterproof with an IP67 rating - Intelligent button LEDs show battery level & charge status - Side illumination windows for improved visibility Blinder R-150 Rear: Blinder R-150 is designed for cyclists that are looking for serious long-distance visibility. - Super bright 150 lumen output - A lightweight 48 grams - 9 eye-catching modes - 100% waterproof with IP67 rating - Side illumination via lens geometry - USB rechargeable battery - Integrated USB-A connector (cable-free) - Up to 50 hr runtime - Compatible with standard & aero seat posts - Low battery & charge indicator

X8 Front Light: - High-quality PREMIUM design - AWARD-WINNING light distribution technology - Easy-to-use LCD DISPLAY shows various information to the user - Extensive side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 80 LUX - 6 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 3 hrs XBR Rear Light: - ACCELERATION SENSOR - when speed is reduced by more than 1.6 m/s (5.76 km/hr or 3.58 mph) an additional LED is switched on - Light guide for INCREASED VISIBILITY AND SAFETY - Brake light is 3 TIMES BRIGHTER than normal output in Steady mode - ADDITIONAL OPTIC in front of LED at lower end of light guide - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Bracket with flexible mounting option -.20 LUX - 7 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 10 hrs

Introducing the ultimate road riders light set—the; PWR Road 700, PWR Mount and Mid Cobber Rear. Putting out an impressive 700 lumens, the PWR Road is a part of Knog's modular bike light range, meaning you can swap light heads, batteries, and use the PWR Bank to charge any device. Also included, is the PWR Mount, designed to discretely tuck the PWR Road 700 directly under a cycling computer using the GoPro style attachment. The Mid Cobber Rear is ‘the worlds safest bicycle light, as it projects light in a 330 degree arc, ensuring visibility from all sides. Coming in at 170 lumens, the 100% waterproof Cobber bike light uses an integrated USB charging arm, and a magnetic bracket with replaceable straps designed to accommodate all tube sizes and shapes. This light set is the highest powered road duo in our catalogue, and is perfect for the road cyclist looking to see and be seen further than the rest of the pack.

The NiteRider Lumina 1200 Boost provides enough light that it can be used in just about all riding conditions, whether it be on the road, on your favorite mountain biking trail, or hand-held in Walk Mode. Specifically designed to meet the needs of riders in all cycling categories, the Lumina 1200 Boost features the Boost Mode light setting. Simply double click the power button, giving you the option to operate your light at maximum light output! And utilizing a CREE LED at 6000k, means you’ll get what most consider to be the best LEDs available on the market today. These high performance LEDs are extremely reliable, with no filament to break or burn out. With the all new custom engineered collimator optics, the Lumina 1200 Boost projects a beam pattern that provides a generous widespread and even beam pattern of 1200 brilliant lumens! The high-strength head light body casing is comprised of lightweight aluminum and Dupont Fiberglass reinforced nylon that is highly durable. The NiteRider Solas 250 uses two powerful LEDs to produce an amazing 250 lumens of light output. It features 4 modes (2 flash / 2 steady) and is USB rechargeable. We’ve implemented what we call “Group Ride Mode” for cyclists who want to stay visible but not distract others in the pack. LUMINA 1200 BOOST - All New Collimator Lens, distributes a generous even widespread beam pattern - Boost Mode, double tap power button to unleash maximum LED output at 1200 lumens! - 5 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. SOLAS 250 - Daylight Visible Flash (DVF) - 250 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - Convenient USB rechargeable - Super bright daytime flash mode - Be Seen by cars = Be Safe - FL1 Standard IP64, dust and water-resistant WARRANTY - The Lumina 1200 Boost and Solas 250 are both backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LUMINA 1200 BOOST - LED Light Head - Internal Li-Ion Battery - Handlebar Clamp Mount (Fits up to 35mm) - USB Charging Cable SOLAS 250 - LED Tail Light - Seatpost Mount - USB Cable

Big Cobber Twinpack Front and Rear lights produce an incredible 330º of light, so you'll be clearly seen from all angles. In an increasingly busy world, these bike lights are brilliantly effective at attracting attention and helping keep you safe on the road. Packing 470 lumens for the front and 270 lumens for the rear, the Big Cobber is seriously bright. The Cobber has integrated USB recharging, is 100% waterproof and you can program the settings using the Modemaker app. If you are looking for the best front and rear commuter bike lights around, look no further. - Light modes: Max, Mid, Steady Pulse, Flash, Rolling Flash, Side Flash, Disco Flash, Eco Flash come pre-programmed. - LEDs : Efficient Chip on Board (COB) LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode. - Integrated USB plug: No charging cable required, plugs directly into USB ports & is designed to be exposed to the elements - Charge time: 5.5 hours (LED will turn off when fully charged) - Battery: USB Rechargeable Lithium Polymer - Bike attachment: Tool-less removable silicone straps for bars/seat posts 22 - 32mm+ diameter with magnetic mount. Aero Mount also included. - Accessories included: Standard Mount, Aero Mount, 3x interchangeable straps for bars/seat posts 22-27mm / 28-32mm+, and USB extension. - Dimensions: 92 x 33mm - Weight: 59g each

The AMPP 1100 uses a compact, twin-LED design with OptiCube lens technology spreading a wide and even beam across whatever the terrain throws at you. The compact, durable AMPP 800 offers superior beam patterns on or off road. AMPP 1100 Features: - High power rechargeable headlight (1100 lm) - Powerful, wide beam with OptiCube lens technology - Excellent side cut-outs for enhanced side visibility - Compact and robust alloy body with composite battery casing - Large capacity lithium-ion rechargeable battery - Built-in fast recharging circuit: Full charge in approximately 3 hours (minimum) - 3-level battery indicator (Blue: above 50% | Yellow: 30-50% | Red: Less than 30%) - USB rechargeable (Micro USB cable included) - Mode memory function - 5 light modes: High, Middle, Low, Daytime HyperConstant, Flashing - Double-click to turn on High mode - Secure FlexTight bracket for quick installation - Water resistant AMPP 800 FEATURES: - High-power rechargeable headlight (800lm) - Powerful, wide beam with OptiCube lens technology - Excellent side cut-outs for enhanced side visibility - Large capacity lithium-ion rechargeable battery - 3-level battery indicator (Blue: above 50% | Yellow: 30-50% | Red: Less than 30%) - Compact and robust alloy body - USB rechargeable (Micro USB cable included) - Mode memory function - 5 light modes: High, Middle, Low, Daytime HyperConstant, Flashing - Double click to turn on High mode - Secure FlexTight bracket for quick installation - Helmet mount - GP bracket for GoPro style mounts - Water resistant Modes/Run time: - High mode: 800 lumens | 1.5hrs - Middle mode: 400 lumens | 2hrs - Low mode: 200 lumens | 4hrs - Daytime HyperConstant mode: 800/200 lumens | 4hrs - Flashing mode: 200 lumens | 30hrs

- Supercharged 1:15 to 85 hour run time. - Extremely powerful 1,800 lumens in the most compact and stylish form. - Cycling Tuned Optics throws a long range, extra wide beam to cover road and mountain biking - Daytime visible flashes make you stand out on busy streets - Two-button design lets you fine tune the brightness and flash speeds to your cycling needs. - Expand run times beyond factory default settings by fine tuning the brightness modes and flash speeds - 9 lighting modes for day and night use - SteadyPulse mode alerts motorists with attention grabbing pulses while its overlapping steady beam constantly lights your way at night. - DayLightning flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - 252 grams - IP67 water resistant for use in all weather conditions - USB rechargeable with 5 hours recharging time - Designed, engineered, and assembled in the USA

- High-quality PREMIUM design - AWARD-WINNING light distribution technology - Easy-to-use LCD DISPLAY shows various information to the user - Extensive side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 80 LUX - 6 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 3 hrs

A brilliant choice for road cyclists who demand the very best in performance and safety - with the Cobber being the world's only rear light with a 330 degree beam. Add to this, long runtimes, carefully considered beam angles, powerful light output and multiple mounting options – the Blinder 900 & Mid Cobber rear combo delivers on all fronts, while greatly improving your confidence on the road. Blinder 900 Front: A powerful front light with multiple mounting options, long lasting battery life and a compact & lightweight form. - Produces a powerful 900 lumen road focused beam - Provides quality illumination up to 100m - Industry leading battery tech provides 2 hrs runtime on full brightness - Up to 120 hours runtime on Eco flash mode - Includes two mounts; a go-pro style attachment for mounting under a computer and a tough rubber strap for the handlebar. - Pre-programmed with 6 light modes to suit all conditions - USB-C rechargeable (cable not supplied) - 100% waterproof with an IP67 rating - Intelligent button LEDs show battery level & charge status - Side illumination windows for improved visibility Mid Cobber Rear: 18 factories told us Cobber would be impossible. We were happy to prove them wrong. - Powerfully bright 170 lumens - Up to 100 hr runtime - Incredible 330° beam angle - Quick mount release - Waterproof to 1 meter with an IP67 rating - USB rechargeable, cable-free charging - Pre-programmed with 8 light modes - Customizable modes with Knog's Modemaker app - Compatible with standard & aero seat posts

Lezyne Ebike Classic Stvzo E800: A highly advanced StVZO certified e-bike cycling headlight. This light is housed in a beautifully machined aluminum body with computerized thermal management to maximize lumen output efficiency. Cutting-edge programming gives this light an innovative high beam/low beam system controlled by a remote switch that lets the user easily toggle between two modes—500 lumens or 800 lumens—on-the-go via a handlebar mounted button. It comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Two mounting options are also included—one Composite Matrix front mount and one machined aluminum fork mount. Compatibility: 11 – 15v input, 7.5w LB / 13w HB. Download the manual below for further installation and compatibility details. - 500 lumen front ebike light with 800 lumen high beam mode - STVZO optimized lens - 130cm cable - Aluminum fork mount

Packaged together, the PWR Road 700 and Blinder Square Rear make the perfect pair. Putting out an impressive 700 lumens, the PWR Road is a part of Knog’s modular bike light range, meaning you can swap light heads, batteries, and use the PWR Bank to charge any device. Also included, is the PWR Mount, designed to discretely tuck the PWR Road 700 directly under a cycling computer using the GoPro style attachment. The Blinder Square, a 100 lumen rear light, is fully waterproof, features an integrated USB recharging arm and comes with three different replaceable silicone straps designed to accommodate any seat tube or frame size. This light set is as powerful as it is versatile and is a must have for any road cyclist.