Skip to main content

Current turnaround time for tuneups: 4-6 days

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

iSSi Flash II
$44.95 - $90.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. - Bushing / Sealed bearing spindle, 52.5mm - Models with longer spindles available in BlackOut - SPD-compatible cleats and mounting hardware included
iSSi Flash III
$78.95 - $120.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options. - Spindle Type: Flip III: Triple Bearing - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included
iSSi Keo Compatible Cleat
$24.95
The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. - Cleat Bolt Pattern: 3-Bolt - Cleat Compatibility: Pedal iSSi , Look KeO - Cleat bolts and washers included - 4mm hex wrench required to install
iSSi Trail II Pedal
$63.95 - $110.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution.
Wolf Tooth Components 42T GC Cog for SRAM
$74.95
The product that set the standard and still the best available! The GC line of cassette extender cogs allow you to modify your 10-speed cassette into a wide range cassette. To achieve the optimal shifting, the GCs are optimized for Shimano or SRAM cassette so always select the correct type for the cassette brand you have. Compatibility: - Compatible with SRAM 10-speed cassettes listed on the GC tech page - Compatible with all 10-speed chains - Note that you may need a longer chain that you currently have on your bike - Chain stretch should be less than .5 when installing a new GC - Compatible with all 10 speed rear derailleurs except non-clutch type SRAM rear derailleurs model year 2012 and older - These older rear derailleurs do work with the GC40. - Can be run in 2x configuration with a long cage rear derailleur - These may fit tightly on some over-sized hub bodies such as Stan's No Tubes 3.30 and the Easton X4 hubs. With a little filing and some grease they will go on.
Whisky Parts Co. No. 9 Riser Bar
$145.00
Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
Wheels Manufacturing Inc. Crank Spindle Spacer
$12.45
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag
Wheels Manufacturing Inc. Crank Spindle Wave Washer
$17.95
Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag
Wheels Manufacturing Inc. Derailleur Hanger 13
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws
Wheels Manufacturing Inc. Derailleur Hanger 144
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 162
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 167
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - For carbon frames, use (2) M3x8 Flat head screws - For all non-carbon frames, use (2) M3x10 Flat head screws
Wheels Manufacturing Inc. Derailleur Hanger 199
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 20
$27.00
All Wheels Manufacturing hangers are produced in their Colorado shop to exacting tolerances using the finest US-made aerospace quality aluminum. - CNC-machined 6061 aluminum - Black anodized finish - Mounting hardware included
Wheels Manufacturing Inc. Derailleur Hanger 27
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 38
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 5
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6 Chainring Bolt
Wheels Manufacturing Inc. Enduro 6806 ABEC-3 Sealed Bearings, Bag of 2
$23.70
Enduro 6806 ABEC-3 Sealed Bearing. Direct replacement bearing for most BB30/PF30 OEM bottom brackets as well as all Wheels Mfg bottom brackets for 30mm spindle cranks. - Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - ABEC-3 - Grade 10, 5/32" chromium steel balls - Kyodo Yushi SRL grease or equivalent - Enduro Part # BB 6806 LLB/C3 - Imported - Sold Bag of 2
Wheels Manufacturing Inc. Extended Hanger
$32.00
Wheels Mfg Extended Hanger lengthens your existing hanger 21mm to provide clearance for larger rear cogs. Fits all standard mount hangers! - 42T max rear cog in a 1x setup - 40T max cog with Shimano or Campagnolo standard mount derailleurs or SRAM derailleur when used with a double or triple ring crankset - 36T max when used with Campagnolo crankset - CNC machined 6061 aluminum - Includes steel fixing bolt - Red anodized finish
Wheels Manufacturing Inc. PF30 Outboard Bottom Bracket for 29mm SRAM DUB Cranks
$99.00
By popular demand, Wheels Mfg. added this PF30 Outboard Bearing BB for use with 29mm spindle SRAM DUB cranksets when used in PF30 frames. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width: 61mm – 73mm (Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers, sold separately) - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 89mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Crank Spindle Diameter: 29mm - Tool Pattern: 48.5mm x 16 notch - Weight: 156g
Wellgo LU-895 Pedals
$14.95
- 1-Piece, molded, cage-style body - Loose ball bearings - Accepts toe clips/straps - Spindle Material: Chromoly - 305g
WTB Silverado Steel Saddle
$35.95
The Silverado is one of WTB’s most iconic and revered saddle shapes. Lightweight and slim, the design oozes speed while proving to be incredibly comfortable. Ride a Silverado and you’ll quickly know what everyone’s raving about. - Long, tapered nose and flatter platform provide ample real estate for shifting positions - Optimized padding-to-weight ratio make the Silverado a hit across all disciplines, including road - Steel rails
WTB Speed Steel Saddle
$35.95
WTB's best-selling saddle utilizes our shock-absorbing, dual compound Soft-Shell base to provide unparalleled comfort at an excellent value. Supportive padding and mid dimensions make for a near fool-proof favorite at a don't-think-about-it-twice price. - Steel rails
Vuelta Square Taper Bottom Bracket
$15.00
-Traditional chromoly square taper crank-arm interface with steel cups - 108mm for use with most Track cranks - 110mm for use with most Road double cranks - 113mm for use with most Road triple cranks - 118mm for use with most Mountain triple cranks - Bolts included
VP Components VP Grind Pedals
$15.00
VP's Grind Pedals meet the needs of hard-core riders who want a slick and durable set of pedals, and they also work great for anyone who likes stable and comfortable platforms. The Grinds have versatile good looks and feature a thin profile, durable 1-piece nylon bodies with grip pins, boron-steel axles and oversize inboard bearings. - 380 grams - 9/16" axles
Tacx Standard Jockey Wheels, SRAM
$16.99
These replacement jockey wheels include standard ball bearings and are durable, run smoothly, and are maintenance-free. Suitable for SRAM road and mountain bike derailleurs.
Surly Krampus 110 Fork
$175.00
Designed around Surly's updated Krampus frame (but also employed on the updated Karate Monkey frames as well), this fork has 15mm thru-axle dropouts spaced at 110mm and clearance for up to a 29 x 3.0-inch tire. To accommodate such big tires it's got a longer axle-to-crown measurement than our Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3.0-inch - Weight: 1180g uncut
Surly Open Bar Handlebar
$59.00
Surly's Open Bar Handlebar is the go-to option for a good time. It features lots of space for grips, shifters, brake levers, or any combination of the a fore mentioned. The swept-back angle is comfortable for your wrists, and the stout chromoly construction is durable yet compliant. It's at home on bike paths or neighborhood cruises, and at an ominous 666mm, it's even wide enough to tackle some singletrack.
Surly Sunrise Handlebars
$65.00
In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, Surly harkens back to simpler times. They wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but Surly included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem. Material: CroMoly steel Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp Width: 820mm; Can be cut to 720mm Rise: 83mm Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep Weight: 778g including shims Color: Black
Sunlite Cantilever Brake Link Wire
$10.29
- Replacement link wire for cantilever brakes
Sunlite Composite Mountain Levers
$9.99
•Designed for cantilever & caliper brakes •22.2mm (7/8") clamp •Constructed from steel and nylon •4 finger •217g pair
Sunlite Galvanized Brake Cable (Tandem)
$5.00
- MTB or Road - 1.5 x 2667mm - Galvanized
Sunlite One Piece BB Set
$10.49 - $22.99
- One-piece bottom bracket cup set - Bearings included - Shell: 68mm - Spindle Type: OPC - Cup Material: Steel - Weight: 265 grams
Sunlite Road/Mountain Shift Cables
$2.59 - $5.59
Shifting cables for Road/Mountain bikes.
Sunlite SL-26 BB
$18.95 - $18.99
- Steel body - Steel cups - Chromoly spindle - Sealed bearings - Interface: English - Square Taper JIS - Weight: 305-320 grams
Sunlite Square Taper Fat Bike Bottom Bracket
$22.99
- Replacement fat bike bottom bracket with square-taper chromoly spindle - Sealed bearings - Steel shell and cups - 120mm shell width - 180mm spindle length - 1.37" x 24T English thread
SunRace R91 9sp Cassette
$23.99
- Fluid Drive Plus shift profiling, compatible with SRAM and Shimano 9sp drivetrains - Steel rings, engineering polymer spacers, nickel plated finish - 11-28 - 280g
Soma Clarence Bar
$69.99
- Unique multi-use bar with excellent ergonomics - Shot peened 6061 aluminium - 2" forward bend from clamp area negates the need to change stems to make up for the grip area sweep. - 1.5" rise for ideal positioning - Bars can be flipped for another take on moustache bars
Soma Sparrow Bar
$69.99
The Sparrow is a touring/townie bar. - The 495mm version is more agile for squeezing through traffic than other townie/MTB bars. - The 520mm is still narrow, but with a grip area that fits levers and shifters. - The 560mm size is better for climbing and single-speeders. Try all the sizes on a single-speed or fixie. - Can be used flipped to be used as a riser bar or down for a less upright position. - Shotpeened Tange Aluminum - 25.4 mm clamp diameter - 50mm drop/rise - 55° backsweep - 22.2mm grip diameter, 20.0mm inside diameter at ends to allow use of pursuit levers. - Weight 245g (495mm)
Soma Thick And Zesty Bar Tape
$11.90 - $14.99
- Shock absorbing 2.5mm EVA blended tape - Adhesive backing, chromed plastic bar plugs, finish tape included - Enough tape for one complete road drop-bar
Silca Nastro Fiore Bar Tape
$44.00
Nastro Fiore is a 2.5mm thick tape that provides cushioning and comfort equivalent to 3.2mm tapes of existing technologies. Fiore has a moderate texture, high tackiness, and printed silicone graphics which add comfort and grip in both wet and dusty conditions. Inspired by advancements in running shoe foam and F1 tires as well as our own research into rolling efficiency, impedance, and damping, we realized that new materials technology could allow for a significant improvement in bar tape. Using a laminate of SILCAthane, SILCAlon, and 3M Visco-elastic adhesive instead of a single-foam extrusion, the tape can be optimized across a range of desired features. The resulting tape has a softer, more comfortable feel, higher wet and dry grip, better vibration isolation, and 3-5x the durability of existing tape materials. Since the actual wrap of the tape can be as important as the tape itself, we've also developed a full adhesive backed 'butterfly' to better cover the back of the lever clamp area without adding bulk, a high-grip finishing tape, and expanding aluminum/composite end plugs to ensure every detail is perfect. - Ultra Performance 2.5mm thick Tri-Laminate design delivers equivalent cushioning to 3.2mm tapes - Debossed Fiore pattern plus embossed Fiore silicone printing for improved grip and cushioning - Aluminum expanding bar-end plug - PU finishing tape - Butterfly-shaped brake clamp cover
Shimano 105 5800 Rear Derailleur Pulley Set
$12.99
- Upper pulley has larger teeth for increased chain control
Shimano 105 Rear Derailleur (Long Cage)
$59.99 - $64.95
Shimano's 105 Rear Derailleur delivers high-end function with upscale looks. With a body of light, durable cold-forged aluminum in Shimano's wide-pivot design with their light-action spring, rear shifting is practically effortless and always super smooth. The top pulley stays a uniform distance from each cassette cog ensuring that every shift resonates with the plunk of exact gear engagement.
Shimano Acera EF-500-2A EZ Fire Shift/Brake Lever
$15.99 - $41.99
The Shimano EF500 8-Speed dual brake/shift lever features reach adjust technology and an optical gear display. - Equipped with a reach adjust mechanism that allows for the distance from handlebar to lever to be adjusted in order to suit any hand size and riding preference - The optical gear display tells you which gear position is selected while riding - Compatible with V-Brake, Mechanical disc brake (MTB)
Shimano Altus M361-L Crankset
$51.99 - $57.99
Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS
Shimano BB-UN26 Cartridge Bottom Bracket
$18.99
BB-UN26 cartridge bottom bracket. - Smooth rotation - Square taper spindle - Sealed cartridge bearing assembly
Shimano Deore 10-Speed Cassette
$42.99 - $58.99
Shimano Deore M6000 CS-HG500-10 10-speed cassette. Combinations: - 11 – 25T: 11-12-13-14-15-17-19-21-23-25T - 12 – 28T: 12-13-14-15-17-19-21-23-25-28T - 11 – 32T: 11-12-14-16-18-20-22-25-28-32T - 11 – 34T: 11-13-15-17-19-21-23-26-30-34T
Shimano Deore RD-M591-SGS Rear Derailleur
$62.99
- Compatible with all Shimano 9-speed HG cassettes, 9-speed mountain shifters, and 9-speed chains - Fluorine coated link pin bushings - On and Off-Road compatible with 28 – 34T low cassette sprocket
Shimano Deore XT 11-Speed Cassette
$104.99 - $117.99
• Steel construction on all but the largest aluminum gear • Nickel-plated finish for corrosion and wear resistance • Dyna-sys 11-speed cassette with "Rhythm step" gearing for closer gear ratios and smoother shifting performance • Fits Dyna-sys 11-speed and current Shimano 9/10-Speed MTB hubs • The largest cog (40t) is positioned inboard and above the drive-side flange • Hubs with tall drive-side flanges may not be compatible due to spoke interference
Shimano Deore/Tiagra HG53 9-Speed Chain
$29.99
- Deore/Tiagra 9-speed compatible - 3/32-inch - 116 links
Shimano Sora Triple Front Derailleur
$36.99
- Model Number: FD-R3030 - Series: SORA - Top Gear Teeth: 50T - Chain Stay Angle: 63-66 - Chain Line: 45 - Models: Braze-on and band clamp available - Band clamp model includes shims for 31.8/28.6mm seat tubes
Shimano Tiagra Rear Derailleur GS
$55.99
Shimano's Tiagra Rear Derailleur GS (10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: RD-4700-GS - Series: Tiagra - Cassette Compatibility: 10 - Maximum Sprocket: low sprocket: 34T / top sprocket: 12T (front double) / 20T low sprocket: 32T / top sprocket: 12T (front triple) - Minimum Sprocket: low sprocket: 28T / top sprocket: 11T (front double) / 20T low sprocket: 25T / top sprocket: 11T (front triple) - Maximum Front Difference: 16T (front double) / 20T (front triple) - Total Capacity: 39T (front double) / 41T (front triple)
Shimano Tourney TY501 Crankset
$23.99 - $28.95
The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain. - Precision indexed shifting - 8/7/6-speed compatible - 3 crank length specification available - Precise chain line control - Light and reliable shifting - Versatile performance - Wide compatibility with multiple components - Quick and precise assembly
Shimano Ultegra 10-speed Chain
$42.99
Shimano's Ultegra 10-speed Chain offers crisp shifting and excellent durability. Smooth, precise shifts come courtesy of the meticulously engineered inner and outer plate chamfers that are specifically designed to accommodate the unique requirements of a moving chain. And, the plates are perforated to trim precious grams. - Weight: 267g
Selle San Marco Presa Corsa Dynamic Handlebar Tape
$15.95
Selle San Marco's Presa Corsa Dynamic handlebar tape is the best in its class. With shock-absorbing gel padding and durable EVA material, Presa Corsa tape is an easy way to ensure your hands stay happy.
Selle AnAtomica NSH2 Saddle
$165.00
NSH2 This is a non-slotted version of H2. See H2 description for details. The non-slotted saddles in general feel stiffer due to the lack of Flex-Fly movement. If you’re coming from a traditional leather saddle and looking for our stiffest ride, you may want to give NSH a try. This version has our Series 2 Aluminum frame with tubular stainless steel rails. Stiffer than our slotted models, NSH will feel more familiar, but also very forgiving. This is the saddle for riders up to about 250 pounds. Made in America Next Gen Modular Frame Hex Key Tension System Industry leading fore/aft adjustability For cyclists seeking our stiffest leather riding platform
Selle AnAtomica X1 Series - Modular Frame
$145.00
X Series is by far our most popular saddle. If you’re unsure which saddle to buy, don’t be. This is it. Unmatched comfort is found in our WaterShed leather, reinforced with our patented laminate design. In X1, our supple WaterShed leather top is supported by a stiffer laminate layer glued to the underside. All this supported by exceptionally long Chromoly rails, providing extensive fore/aft adjustment. Comfort is found in the specific shape of our patented slot shape, which moves with you. Our slot eliminates perineal pressure, sit bone pain, and saddle sores. Good design means finding the ideal balance for opposing constraints - comfort and durability. With the X Series we’ve struck the perfect balance. This saddle has no break in period. It feels good from day one. X Series is the do it all saddle for riders who weigh from 120 to 190 pounds. Full Grain Leather Patented Flex-Fly Slot relieves perineal discomfort and sit bone pain Hex Key Tension System Industry leading fore/aft adjustability Optional Real Copper Rivets Designed for cyclists who ride more than 100 miles per week and/or weigh between 120 and 190 pounds Made in San Diego, CA, USA
Salsa Bend Bar Deluxe Handlebar
$75.00
For those seeking a different take on a traditional mountain bike handlebar, the Salsa Bend Bar is available with either a 17 or 23-deg sweep, offering a more natural hand position without affecting reach or requiring the need to change your stem length. The Bend Bar swoops forward, then sweeps back to create an angled perch that’s easy to hang on to. They’re tough, strong, and durable, and great for long days bikepacking, touring, or shredding singletrack. - Constructed using double-butted, AL-7050-T76 aluminum - Bar sweeps forward, then back, to preserve stem length - 5-deg upsweep allows adjustment to suit personal preference - Bar can be flip-flopped to run up or down - Graduated ends for easy trimming - Bead-blast black finish
Salsa Cane Creek +3mm 40mm Lower Race Custom for Salsa
$12.00
Custom Cane Creek lower race for Salsa.
Salsa Cowchipper Deluxe
$75.00 - $80.00
The Salsa Cowchipper provides comfort, control, and efficiency for long days in the saddle, whether road touring, crushing mixed surfaces, or conquering the Great Divide. While the Cowchipper retains some resemblance of a traditional road bar, its radical 24° flare in the drops boosts leverage, stability, and comfort dramatically. - Lightweight and strong 7050-T6 series aluminum alloy construction - 116mm drop, 68mm reach, 24° flare angle, 12° drop angle - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 293g (44cm)
Page 1 of 55 Next page