Saddles

The Elite E2X is ideal for: Triathletes, Ultra Cyclists and Road Cyclists. Ideal for cyclists who have a lean physique and “less cush in the tush”. NOT recommended for upright cyclists such as Touring, Bike Packing or MTBers. It allows for cyclists with perineum hot spots, cysts, or some type of surgical intervention. The rear flow vents allow the cyclist to slide back in the rear support of the seat while mastering their pedal stroke up the hills. It features our signature cutout design with a lateral sling support. This allows the cyclist to rotate the pelvis forward to ride on the pubic rami. The dimensions are 10.25 in (260.35 mm) by 6.5 in (165.1 mm). The inside sit bone to sit bone is 130 mm max. Weight: 265 grams.

The E3-Series is an ideal choice for: Triathletes, Ultra Cyclists, Road Cyclists, Tandem and Touring cyclists. The bifurcated horn of the seat creates a space for both male and female soft tissue areas while cycling in an aggressive, aero or drop position. It features our signature full-cutout design. Hand shaped and covered with state of the art 1/4 inch Aerospace foam and individually, hand-crafted in genuine Italian leather*. The dimensions are 10.25 in (260.35 mm) by 6.5 in (165.1 mm). The inside sit bone to sit bone is 130 mm max. Weight: 265 grams. We now offer Vegan Leather for all our Infinity Seats. They have been tested for strength and durability. While at the same time it has the soft feel of elegant leather gloves. This has all been achieved through advanced technology without using exotic or domestic animals, or PVCs (polyvinyl chloride).

The E1X-Series is an ideal choice for a more relaxed upright Road cyclists, TT, MTBers, Cyclocross, Gravel, Ultra-cyclist and the Weekend Warrior. It has a “hammock” feel with the ability to sit in the pocket; and to shift position on the seat. Ideal for climbing and long distance. The cyclist’s weight is distributed over the entire seat to accommodate: an aggressive forward pelvic tilt in the drop bars or aero position; an upright position or, if they have limited Spinal Pelvic Range of Motion. It features our signature full-cutout design frame covered with an 1/8 inch foam and individually, hand-crafted in genuine Italian leather. The dimensions are 10.25 in (260.35 mm) by 6.5 in (165.1 mm). The inside sit bone to sit bone is 130 mm max. Weight: 265 grams.

The E2 is ideal choice for Road Cyclists, Tandems and Touring cyclists. Ideal for any type of pelvic hot spots for either male or female. It relieves butt bone pain and protects your perineum/pubic bone area. It features our signature full-cutout design frame covered with an 1/8 inch foam and individually, hand-crafted in genuine Italian leather. The dimensions are 10.25in (260.35 mm) by 6.5 in (165.1 mm). The inside sit bone to sit bone width is 130 mm max. Weight: 245 grams. We now offer Vegan Leather for most of our Infinity Seats. They have been tested for strength and durability. While at the same time it has the soft feel of elegant leather gloves. This has all been achieved through advanced technology without using exotic or domestic animal, or PVCs (polyvinyl chloride). Carbon Fiber Rail is an oval rail, 7 x 10 mm, in a natural charcoal gray color. Carbon Fiber Rails will make any of our seats 100 gms lighter. Carbon Fiber Rails are interchangeable with any of our seats. Carbon Fiber Rail Recommended for intermediate to advanced cyclists. Carbon Fiber Rail Not recommended for any off road cycling, gravel biking, power assist bikes or extreme MTBing due to the nature of the carbon fiber material. The Carbon Fiber rail diffuses the G-force shock felt from the surface of the road through the bike that transfers to the cyclist. With Carbon Fiber Rail, while in a high performance mode, delivering a high wattage cadence, you’ll have a decrease loss of energy from side to side and an increase kinetic energy in a forward motion. For side mount clamp of the Carbon Fiber Rail: you’ll need to get a 7x10mm ears and cups for your seatpost. For top mount clamp of the Carbon Fiber Rail: should be fine, but you might need a longer bolt to accommodate the 3mm increase in height of the rail. For Carbon Fiber Rail, watch video for installing G-Force pads for both side and top mounted seat posts.

Limited Edition Seat. The E1X-Series is an ideal choice for a more relaxed upright Road cyclists, TT, MTBers, Cyclocross, Gravel, Ultra-cyclist and the Weekend Warrior. It has a “hammock” feel with the ability to sit in the pocket; and to shift position on the seat. Ideal for climbing and long distance. The cyclist’s weight is distributed over the entire seat to accommodate: an aggressive forward pelvic tilt in the drop bars or aero position; an upright position or, if they have limited Spinal Pelvic Range of Motion. It features our signature full-cutout design frame covered with an 1/8 inch foam and individually, hand-crafted in genuine Italian leather. The dimensions are 10.25 in (260.35 mm) by 6.5 in (165.1 mm). The inside sit bone to sit bone is 130 mm max. Weight: 265 grams. Carbon Fiber Rail is an oval rail, 7 x 10 mm, in a natural charcoal gray color. Carbon Fiber Rails will make any of our seats 100 gms lighter. Carbon Fiber Rails are interchangeable with any of our seats. Carbon Fiber Rail Recommended for intermediate to advanced cyclists. Carbon Fiber Rail Not recommended for any off road cycling, gravel biking, power assist bikes or extreme MTBing due to the nature of the carbon fiber material. The Carbon Fiber rail diffuses the G-force shock felt from the surface of the road through the bike that transfers to the cyclist. With Carbon Fiber Rail, while in a high performance mode, delivering a high wattage cadence, you’ll have a decrease loss of energy from side to side and an increase kinetic energy in a forward motion. For side mount clamp of the Carbon Fiber Rail: you’ll need to get a 7x10mm ears and cups for your seatpost. For top mount clamp of the Carbon Fiber Rail: should be fine, but you might need a longer bolt to accommodate the 3mm increase in height of the rail. For Carbon Fiber Rail, watch video for installing G-Force pads for both side and top mounted seat posts.