kLite kLite ULTRA LOW DRAG ROAD KIT: Low-Drag 750 Lumen / Handlebar Bracket / Dual USB Charger / Pro-Race "USB Always On" Wiring Loom
**** kLite products are available for order, but we do not keep them on hand in store due to their cost. You can order online for pickup in store, and we will get them shipped in from our supplier as soon as possible (usually 3-4 days). *** The ultimate endurance racing electron kit! Just add a Son Delux dynamo hub, and you're ready for an extended transcontinental adventure. kLite--the leader and primary innovator in self-supported adventure racing--has come up with the ultimate long distance, high speed, self-supported lighting / charging kit. This kit includes an ultra low drag triple beam light, a dual USB charger, and an “expedition rated” USB always on lighting switched wire loom designed specifically for the SON delux dynamo hub. This setup allows you to use the light while simultaneously charging your GPS and running a low draw kLite Qube rear flashers, or switch off the light and charge a high draw appliance like a mobile phone or battery.
kLite kLite ULTRA MTB KIT: Wide 180 Degree 1,300 Lumen Beam / Handlebar Bracket / Dual USB Charger / Pro-Race "USB Always On" Wiring Loom
The ultimate endurance racing / touring electron kit! Just add a dynamo hub, and you're ready for an extended off-the-grid adventure. kLite--the leader and primary innovator in self-supported adventure racing--has outdone itself with this latest product setup. 1,300 lumens, waterproof, and vibration proof. Just choose the type of dynamo hub connection on your adventure rig and this kit has everything you need to get off the grid, light up the trail ahead, and simultaneously charge two of your critical devices. ULTRA MTB--Wide 1,300 Lumen Triple Beam: 2x Flood Optics, 1x Spot Optic. Intended for MTB singletrack riding, the ULTRA MTB uses diffused lenses on the two outside lamps to provide 180 degrees of lighting, and the center lamp projects out to illuminate the trail ahead of the rider. On twisty singletrack, illuminating your immediate surroundings is critical—and this is where the “down the road” illumination provided by traditional dynamo lamps fall short. Below 13kph / 8mph, the ULTRA V2 boosts the power from the dynamo, providing dramatically more illumination than any other dynamo light at slower speeds. At 13kph / 8mph, the center spot kicks on to provide even more—with a boost of down the trail illumination. Many say that the combination of the wide and spot beams on this lamp allow them to leave their helmet mounted lights at home, reducing overall weight and complexity. The configuration also helps prevent light flare off near-to-the-trail obstacles--a factor which can lead to eye strain. The unit also has capacitive storage which provides wide flood light in low power mode for ~10 minutes without incoming power – ideal for hike-a-bike, on-the-trail maintenance, and a quick camp setup. When coupled with the kLite USB charger and kLite wiring loom, this unit provides a turnkey ultra-endurance platform designed to keep your electronics charged and you on the trail. Ships with a handlebar mount; designed for use with the kLite dynamo wiring loom and any current dynamo hub. kLITE DUAL USB CHARGER. This weatherproof dual USB charger accessory converts the varying load of alternating current thrown off by your dynamo hub into two steady streams of 5V USB DC charging. A red LED lamp assures you that magic is happening and electrons are actually making their way from your hub into your USB device. Cleverly designed and small enough to fit wherever you feel the best spot is for your charging excellence, including inside of your bikepacking bags! (Dimensions: 8cm x 3.5cm x 2.5cm, inclusive of ziptie mounting holes). The mounting options are virtually endless - I have mine mounted upside down to the side of the head tube with three zip ties, providing easy access from the handlebars and to charging accessories such as the kLite QUBE rear blinker and GPS / Phone accessories on the handlebar. kLITE "ALWAYS ON" DYNAMO WIRE LOOM AND SWITCH. The trail lamp and dual USB charger are connected by an "expedition rated" wire loom that provides a positive, waterproof connection to your dynamo hub. Toggle the switch on and you have lights and USB charging, toggle the switch off, and the lights are off and you have USB charging only. This "always on" USB functionality is perfect for endurance riders who need constant GPS charging and for those interested in the kLite QUBE--a flashing rear light accessory available separately. The kit provides the following elements: kLite ULTRA v2 Lamp- Wide Beam-MTB / Singletrack Version (133g) Dual USB charger with LED indicator lamp (68g) Pro "always on" wiring harness with lamp "on / off" switch - indicate dynamo connection type preference (58g) Handlebar / Fork lamp bracket and mounting hardware (67g) Zip ties to connect the wiring loom and USB charger to your bike
The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. - Cleat Bolt Pattern: 3-Bolt - Cleat Compatibility: Pedal iSSi , Look KeO - Cleat bolts and washers included - 4mm hex wrench required to install
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. - Bushing / Sealed bearing spindle, 52.5mm - Models with longer spindles available in BlackOut - SPD-compatible cleats and mounting hardware included
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution.
The TRS Race tire utilize the same tread pattern as previous versions, but have been reengineered with the addition of tapered Apex inserts designed into the tire. Combined with a layer of woven aramid reinforcement to protect against sidewall cuts and punctures, increasing grip under cornering and braking, while decreasing rolling resistance. - Aggressive tread pattern with a structural, angled base on the side knobs to control tire roll under high-speed cornering - Sipes are positioned to provide confident transitions from straight lines to cornering and confident braking traction - Ramped, shorter center knobs keep TRS tires rolling fast - Race tire features a single-ply design with slow rebound tacky rubber center tread, with high-tack rubber on side knobs - Tubeless-ready design
The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms. - Designed to fit Shimano Dura-Ace 9000 cranks - Includes 4 T30 Torx bolts and 4 bolt covers - Not compatible with absoluteBLACK Sub Compact oval chainrings
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored seatpost color is available on the Zipp Service Course Seatpost. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, we are proud to offer redesigned Service Course seatposts. - Material: 6061 aluminum - 2-bolt adjustability - Minimum insertion length: 90mm
Zipp's 3ZERO MOTO carbon rims are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Fast, secure, and easy to use, the HoldUp EVO is built to handle new bike standards, like fat tires and boost hubs, but it easily carries the classics too. The StrongArm hook secures the bikes at their wheels, protecting carbon frames and painted surfaces. Tilt the rack with bikes loaded for quick rear-of-vehicle access using the new easy-to-reach tilt lever and KickStart foot pedal. The super-simple locking SpeedKnob makes install a tool-free breeze and included SKS bike locks keep your mind at ease. - Hitch-mounted tray rack that loads quickly and carries two bikes without frame contact - Easy-access tilt mechanism and KickStart foot pedal make raising and lowering the rack a breeze, even with bikes loaded - Tool-free locking SpeedKnob makes installation and removal fast, easy and secure - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Easily adjust trays to reduce bike-to-bike interference - Fits most bikes, including fat-tire, mountain, road, hybrid, women's-specific, BMX, kids' bikes, & E-bikes under 50 lbs. - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20" to 29" wheel sizes and tires up to 4.8" wide - Accommodates bike wheelbases up to 48" - Integrated SKS (Same Key System) locks included for added bike security - Carry four bikes – just add the HoldUp EVO +2
Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8"" steerers only - Made from 6061-T6 Aluminum
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base
The product that set the standard and still the best available! The GC line of cassette extender cogs allow you to modify your 10-speed cassette into a wide range cassette. To achieve the optimal shifting, the GCs are optimized for Shimano or SRAM cassette so always select the correct type for the cassette brand you have. Compatibility: - Compatible with SRAM 10-speed cassettes listed on the GC tech page - Compatible with all 10-speed chains - Note that you may need a longer chain that you currently have on your bike - Chain stretch should be less than .5 when installing a new GC - Compatible with all 10 speed rear derailleurs except non-clutch type SRAM rear derailleurs model year 2012 and older - These older rear derailleurs do work with the GC40. - Can be run in 2x configuration with a long cage rear derailleur - These may fit tightly on some over-sized hub bodies such as Stan's No Tubes 3.30 and the Easton X4 hubs. With a little filing and some grease they will go on.
- Allows two SuperStands to be connected together in an unlimited number of configurations to suit every bicycle shop layout, size and area
$43.90 - $51.90
- Shop quality bicycle display and storage stand - Graphite ripple powdercoat over steel construction - Four-Point, Foam rubber end-Cap feet - 2 Piece design disassembles for space-Efficient storage - Standard and extreme models feature welded base construction (Extreme model accepts up to 3 inch tires) - Retail model features flat-Packed, Bolt-Together base construction - Fat rack features flat-Packed, Bolt-Together base construction and will suit tires from 3.8" To 5" with three width positions, 4.25", 4.75" And 5.25"
Stainless Steel Cage for Large Bottles Made in USA The Widefoot LiterCage™ allows you to carry your favorite bottles on your bike. Compatible with a variety of 3.5? (89mm) diameter water bottles including those made by Nalgene and other top brands. Our unique 7-slot mounting bracket allows attachment at multiple positions on frames and forks with two-bolt, or three-bolt mounting systems. Full stainless steel construction provides durability, corrosion-resistance, and a secure hold. Choose from two finishes: Polished or Black. As with any type of coating, our Black option will show some wear over time in locations where bottles contact the cage. For more information on installation and use, see Description below. A list of compatible bottles is available in the LiterCage Fit Guide. Note: Mint, Orange, and Purple have been discontinued Installation and Use: 1. Install by bolting onto sets of two or three mounting bosses to carry bottles that are approximately 3.5? (89mm) in diameter. 2. Use hose clamps and other non-bolt methods at your own risk. 3. Taller or heavier bottles, rougher terrain, or non-upright installation may warrant the use of a strap. Mounting hardware, bottles, and straps are not included. Installation by a professional bicycle mechanic is recommended. Consult with your bicycle manufacturer if you have questions about compatibility with your bike frame or fork. Always ensure your cage and bottle are secure before riding, and keep loose ends away from moving parts.
Low-profile Cargo Rack Made in USA The original one-piece aluminum cargo carrier. The Widefoot CargoMount™ allows you to securely strap down a variety of bottles, smaller bags, and cylindrical objects to your bike frame or fork. Made of sturdy and lightweight aluminum, and available in Silver Anodized or Black Coated finish. Our unique 7-slot configuration allows you to fine tune your installation at multiple positions on frames and forks with three-bolt mounting systems. Weighing just 68g, it’s among the lightest cargo cages on the market. Note: Mint, Orange, and Purple CargoMounts have been discontinued Installation and Use: 1. Install by bolting onto sets of three mounting bosses. 2. Use hose clamps and other non-bolt methods at your own risk. 3. Thread two straps (not included) through, then around the outside of the CargoMount. 4. Wrap straps around your cargo, and securely fasten according to your straps instructions. Keep loose ends away from moving parts. Mounting hardware is not included. Straps are not included. Installation by a professional bicycle mechanic is recommended. Consult with your bicycle manufacturer if you have questions about compatibility with your bike frame or fork. Use of two straps is recommended. Always ensure your CargoMount, straps, and cargo are securely fastened and not interfering with moving parts before riding.
White Lightning's Crystal Grease is so pure and innovative, it's clear. Premium base oils allow this 100% waterproof grease to provide smooth, long-lasting lubrication and the clear color won't stain or hide damage and contaminants. And, you'll feel good knowing that it's biodegradable, non-toxic, and won't harm carbon, seals and other crucial components.
$9.99 - $15.99
- Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors
$40.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
The Whisky No.7 Seatposts are made from the highest quality materials to be durable, lightweight, and comfortable. Whether you’re remounting during the cross race, or abusing them on the trail, you can trust Whisky’s seatposts. Available in different diameters and offsets. - Convenient finger adjustment of saddle angle - Unidirectional carbon shaft, forged aluminum head - No rider weight limit - 5 year Whisky warranty - ASTM Condition 3 - For rough off-road riding and jumps less than 24"
Whisky's No.7 24f is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers
Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech 9mm x 26, front hub - Compatible with 9mm x 26 axle - Cone Wrench Size: 13mm - Threads: 9mm x 26 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Joytech 9mm x 26, front hub - Taiwanese hubs with 9mm x 26 axle - 105 SC 1055 8-speed Rear - 105 SC 1056 7-speed Rear - XT-II M732 7-speed Rear
Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (bolt only)
Enduro 6806 ABEC-3 Sealed Bearing. Direct replacement bearing for most BB30/PF30 OEM bottom brackets as well as all Wheels Mfg bottom brackets for 30mm spindle cranks. - Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - ABEC-3 - Grade 10, 5/32" chromium steel balls - Kyodo Yushi SRL grease or equivalent - Enduro Part # BB 6806 LLB/C3 - Imported - Sold Bag of 2
Page 1 of 28 Next page