Filter By:
Hubs
$219.99
- An oversized hub shell increases torsional and lateral stiffness
- 6902 bearings for maximum durability
- Wide bearing placement was designed to decrease load on the bearings
- Low-drag labyrinth seals
- Tool-free endcaps
- Torque-cap compatible
- Includes standard 15mm end-caps only, Torque must be purchased separately
$379.99
At the Center of It All
Cast your eyes upon your new favorite component, the infinitely adaptable, fully tuned-and-dialed hub of choice for your custom wheel build. The Vault has almost instant power transfer for slippery-fast speed by way of solid, smart design.
Power To The Pedal
Let's add it up: a 60-tooth drive ring, 6 pawls, acting in 2 groups of 3, for 120 points of engagement. The result– almost instant transfer of power.
Overbuilt But Not Overkill
With this hub, bigger is better. An oversized hub shell ads stiffness and stability while large and in-charge 6902 bearings perform for the long run.
$92.79
- Forged aluminum construction
- Sealed Cartridge bearings
- Double contact seals
- 6-bolt disc rotor compatible
- 8/10-speed cassette compatibility
- Quick-release
- 135mm hub spacing
$269.99
- Elite Series convertible road disc hubs
- Available in multiple axle configurations
- Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement
- Straight pull and J-bend spoke options
- 6 bolt and Center Lock disc brake rotor options
- Sealed bearings
- Material: AL6061
Straight Pull Spoke/QR Axle:
PCD-L: 35mm
PCD-R: 49mm
LTF-L: 32.75mm
LTF-R: 50.05mm
CTF-L: 34.9mm
CTF-R: 17.6mm
Straight Pull Spoke/12mm Thru-Axle:
PCD-L: 35mm
PCD-R: 49mm
LTF-L: 36.25mm
LTF-R: 53.55mm
CTF-L: 34.9mm
CTF-R: 17.6mm
J-Bend Spoke/QR Axle:
PCD-L: 45mm
PCD-R: 50.6mm
LTF-L: 32.65mm
LTF-R: 48.2mm
CTF-L: 35mm
CTF-R: 19.45mm
J-Bend Spoke/12mm Thru-Axle:
PCD-L: 45mm
PCD-R: 50.6mm
LTF-L: 36.15mm
LTF-R: 51.7mm
CTF-L: 35mm
CTF-R: 19.45mm
$56.99
Sealed cartridge bearing
High flange design w/cut outs
100mm OLD
Lightweight, hollow, heat-treated axle
Black, silver, or white
32 or 36-hole spoke drilling
$69.99
• Sealed cartridge bearings
• High flange design
• 120mm hub spacing
• Aluminum hub body
• Lightweight, hollow, heat-treated axle
• Fix/freewheel hub threading
• 32 and 26-hole spoke drilling
• Bolt-on 3/8-inch axle
• Black, silver, or white
$189.99
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec.
Same Clutch coaster hub you’ve come to love, but with a few upgrades.
Features:
- Maximum strength axle design
- Super-durable bearing arrangement throughout
- 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required.
- Super-durable drag mechanism design
- Crankflip ready
Improvements Over the Clutch V1:
- 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability
- Improved clutch engagement
- Improved manufacturing precision throughout
- More slack than the V1 hub
- All-new durable proprietary plastic spec for the removable hub guard
Specs:
- 36-hole, 2014-T6 aluminum shell
- 9T Driver
- Left or right hand drive
- 22 oz / 623g
Guard Options:
- Plastic hub guard included (but optional to use)
- Alloy hub guard also available
$69.99
The Vandero hub is back and better than ever. This new PRO version of the Vandero is a precision sealed hub with proven in-bound 3/8-inch axle bolts and two plastic guards.
Features:
- 7075-T6 aluminum hub shell
- 6903RS sealed cartridge ball bearings
- Precision bored fully concentric bearing seats for a smoother spin and prolonged bearing life
- 17mm 7075-T6 aluminum axle with steel helicoil thread inserts
- 3/8-inch heat-treated chromoly axle bolts with 17mm wrench flats and a 6mm hex slot
- Weight: 11.2oz
- Replaceable plastic hub guards included
$240.00
Industry Nine Hydra Classic mountain hubs are loaded with features every rider will appreciate such as revolutionary 0.52° engagement, generously low weights and an intuitive layout that can be serviced without any proprietary tools.
- From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards in Asheville, NC
- 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control
- Classic j-bend spoke interface
- Steel cartridge bearings are durable
- Easily serviced with no proprietary tools; Designed to keep you in the saddle and out of the service queue
$460.00 - $470.00
Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards.
- 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control
- 6 pawl, 6 phase
- 115 tooth drivering
- Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue
- Classic j-bend spoke interface
- Steel cartridge bearings are durable
$475.00 - $485.00
Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards.
- 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control
- 6 pawl, 6 phase
- 115 tooth drivering
- Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue
- Classic j-bend spoke interface
- Steel cartridge bearings are durable
$460.00 - $470.00
Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards.
- 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control
- 6 pawl, 6 phase
- 115 tooth drivering
- Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue
- Classic j-bend spoke interface
- Steel cartridge bearings are durable
$29.21
15x142mm conversion kit for Hope Fatsno front hubs.
$29.21
Hope Front Axle Conversion Kits
· Compatible with Pro 2 and Pro 2 Evo hubs
· Converts all Hope Pro 2 and Pro 2 Evo hubs to 15mm through axle hubs
$32.29
Hope Front Axle Conversion Kits
· Compatible with Pro 2 and Pro 2 Evo hubs
· Converts all Hope Pro 2 and Pro 2 Evo front hubs to 20mm through axle hubs
$32.29
Hope Front Axle Conversion Kits
· Compatible with Pro 2 and Pro 2 Evo hubs
$25.00
12x142mm conversion endcaps for Hope Pro 2 Evo rear hubs.
$133.13
Hope XD-11 Freehub Bodies
· Converts Hope Pro 2 hubs to work with XD Driver
· Contains axle, endcaps, bearings and driver
$108.38
Hope Pro2 Evo Freehub Bodies
· Not compatible with Hope Pro2
$108.38
Hope Pro2 Evo Freehub Bodies
· Not compatible with Hope Pro2
$714.90
The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings.
The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.
$714.90
Aluminum rear hub for bicycle - 18P DBCL 24 holes, straightpull, black. Aluminum Campagnolo freehub body, black.
- Dimension: 12x142mm
$383.90
The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings.
The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.
$383.90
Aluminium front hub for bicycle - 18P DBCL 24 holes, straight pull, black. Dimension: 12x100mm.
$465.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
$436.90 - $465.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
$465.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hub, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.