Taillights

• Road bar specific bright red LED • Push-in resin body replaces bar end plug • Sold as pair. Uses single AAA batteries

With a dazzlingly bright 28 LED PB Power Array and three modes, this USB rechargeable light is like a Scarlet Begonia for the back of your bike. For added safety, it has a CPSC certified reflector in the lens to keep you visible when the light is off. Versatile mounting options allow you to attach it to your seat post or rear rack with the included brackets. - PB 28 LED power array and CPSC certified reflector provides steady, Courtesy & Superflash modes - FL1 Tested - Run times: 5 hrs (steady – 20 lm), 9 hrs (Courtesy – 6-18 lm) and up to 30 hrs (Superflash - 20 lm) - Provide 160-degrees of visibility - Highly visible, even in daylight - Dust and water resistance rated to IP65 standard - 700 mAh lithium polymer battery charges in 2.5 hours with micro USB cable (included) - Includes rear rack and seat post mounts plus clip mount for multiple mounting options - 65 grams

The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system

The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable

The NiteRider Sentry Aero 260 is a lightweight, aero taillight featuring dual LED light strips to deliver 260 lumens of Daylight Visible red light. An inner and outer lens design helps to shape light output, producing long-range visibility when viewed directly from the rear, but also providing ample surrounding light to the peripheral, making the Sentry Aero 260 visible from nearly any angle. - Daylight Visible Flash (DVF) - 260 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off Aero seat post strap mount with quick release tab - Aero seat post strap included - Convenient USB rechargeable - Super bright Daylight Visible Flash mode - Innovative Aero shape with excellent side visibility - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentry Aero 260 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seat post Mount - USB Cable

Vmax+ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more! For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used. - 6 Modes with Run Times: 4:30-25:30h - Lumen Output: 150 - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable - Mode Memory (Powers ON in last mode used)

MSW USB rechargeable taillight. Includes micro USB cable for charging. - Tool-free installation - Aluminum body construction - 15 lumen output - Fits 19mm–48mm tubing - 28g weight

Maintain Visibility All the Time. As with all the lights in the Recon series, the new Recon TL200 has a compact design, an integrated power indicator, complies with the ANSI standard and is IPX7 certified. Additionally, the smart light sensor can auto adjust the light output, day or night, to ensure you can be seen all the time. - Maximum output to 200 lumens - ANSI-Standard certified lumen output and runtime - Water proof to IPX7 standard - Two-lens focused and dispersed optics with side light design for over 270-degrees of visibility - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost and Prompt series helmets - Compatible with saddle rail mount, providing optimal angle for visibility

Stay clean and stay seen with Topeak's DeFender iGlow. It's a unique rear fender that has an integrated 0.5W light for safety at night or during low-visibility conditions. Strap this impact-resistant plastic fender down quickly and easily to the junction of your bike's seat and top tubes, and adjust it for perfect coverage. With constant and blinking modes, this light is ready when you are.

The RedLite 80 BT features 80 lumens and five lighting modes that can be wirelessly controlled via Bluetooth 5.0 by WhiteLite 800 BT or TetraBand BT. Bidirectional tool-free mounting with the included silicone strap for quick installation and removal on aero/round seatposts or seatstays - Battery: Li-Ion - Recharge Type: USB - Lumens: 80 - Lamp: Red COB 3W LED - Battery: 3.7V 1000mAh Lithium Ion (integrated) - Control: 5 modes (High 800 lm - 2.5hrs / Middle 400 lm - 5 hr / Low 200 lm - 9 hr / Blink - 200lm - 20 hr / Pulse 400 lm - 15 hr) - Charge/Charge Time: USB-C / 2 hr - Reserve Time: 0.5 hr - Mount: Strap mount fits aero or round seatposts (25.4 - 34.9mm), seatstay, and Topeak bags - Size: 3.2" x 1.5" x 1.3" - Weight: 51g. - Color: Black

Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.

Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.

Put it on your seatpost, put it on your seatstays, put it anywhere, Sunlite's Griplite goes almost everywhere. This powerful little light has 4 LEDs and runs for 60 hours! It has steady and flashing modes and is housed in a water-resistant body.

- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 6

- USB-rechargeable rear light with 42 COB LED chips - 7 different modes featuring two steady modes and 5 flashing settings - Innovative quick-release bracket can be attached to seat posts or helmets - Low-battery warning and integrated battery protection - Weighs only 26 grams

- Flat COB chip rear LED light with 38 individual COB chips - USB rechargeable 300 mAh li-ion polymer battery - 7 modes including a high and low setting and 5 flashing settings - Daytime flash modes enhances safety in any conditions or time of day - Low battery warning and battery capacity indicator (double click button to check) - Mode memory and tool free installation - Mount: seatpost - Lumens: 20

- COB style LED rear safety light in the shape of a heart - Perfect for cruisers, kids bikes or anyone that is feeling the love and desires a little extra flair on their ride - USB rechargeable with integrated low battery indicator Modes: 5 Mount: Rubber Strap Rechargable: USB Lumens: 15 Lumen Range: 1-100

- USB rechargeable 3 lumen safety light - 4 modes including 1 solid and 3 flashing settings - Multi-fit rubber strap attachment - Charging cable included

- 20-lumen COB chip LED tail light - Powered by 2 AAA batteries (included) - Can be installed horizontally or vertically - IPX3 water-resistant rating

- 8 lumen safety tail light - Built in Li-Ion USB rechargable battery - 3 modes - 2 steady and 1 flashing setting - Multi fit rubber strap attachment - Low battery indicator

- High brightness 16 chip COB style LED light - 4 modes including 2 solid setting and 2 flash modes - USB rechargeable - cable included - Lumens: 30 - Mount: rubber strap

- USB rechargeable super bright COB style LED light - 8 modes - 4 brightness levels each of both steady and flash - Charging and low battery indicator - Single button interface - quick press to change mode, long press to turn off and double tap to change mode, long press to turn off and double tap to change from steady to flashing - 3 hour charge time - Lumens: 100 - Mount: Rubber strap

- 24 lumen LED - Built-in Li-Ion USB rechargeable battery - 1.5 ~ 6 hour run time per charge - Low battery, charging, and fully charged indicator - Includes USB charging cable - 3 modes (2 Steady and 1 Flashing) - Multi-fit rubber strap - Water resistant

• 2 x 0.5 watt super bright red LEDs • Built-in Li-Ion rechargeable battery • 2 mode (steady / flashing) • 2 to 4.5 hour run time • Includes USB charging cable • Multi-fit QR seat post mount • Water resistant

• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body

• 2 x 0.5 watt super bright red LEDs • 3 modes (1 steady 2 flashing) • Multifit bracket (25-32mm)

• 5 LED rack mount rear light • 4 modes (1 steady 3 flashing) • Bolt-on mount for rear racks

- USB multi-purpose safety light can be used on clothes, helmets, or bikes - 360° bracket allows multiple mounting options for a variety of applications - 25 lumen output through 9 COB chip LEDs - 5 modes offer day and night uses - 4 to 6-hour runtime

Get that roadster night-ready with this fender-mounted taillight. Designed to fit perfectly on any of our Pure City fenders, so you can boost your visibility without cluttering up your ride. - Fits any Pure City Step Through or Classic - 2x AA batteries not included - The integrated cage is both visually pleasing and functional as it protects the light should your ride fall over - 5mm LED with built in reflector housing pulls double duty to help keep you seen and safe

Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.