Skip to main content

Current turnaround time for tuneups: 4-6 days

Filter By:

  • Show More Brands

  • Show Fewer Brands

Racks

Widefoot CargoMount
$48.00
Low-profile Cargo Rack Made in USA The original one-piece aluminum cargo carrier. The Widefoot CargoMount™ allows you to securely strap down a variety of bottles, smaller bags, and cylindrical objects to your bike frame or fork. Made of sturdy and lightweight aluminum, and available in Silver Anodized or Black Coated finish. Our unique 7-slot configuration allows you to fine tune your installation at multiple positions on frames and forks with three-bolt mounting systems. Weighing just 68g, it’s among the lightest cargo cages on the market. Note: Mint, Orange, and Purple CargoMounts have been discontinued Installation and Use: 1. Install by bolting onto sets of three mounting bosses. 2. Use hose clamps and other non-bolt methods at your own risk. 3. Thread two straps (not included) through, then around the outside of the CargoMount. 4. Wrap straps around your cargo, and securely fasten according to your straps instructions. Keep loose ends away from moving parts. Mounting hardware is not included. Straps are not included. Installation by a professional bicycle mechanic is recommended. Consult with your bicycle manufacturer if you have questions about compatibility with your bike frame or fork. Use of two straps is recommended. Always ensure your CargoMount, straps, and cargo are securely fastened and not interfering with moving parts before riding.
Topeak VersaCage
$29.95
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
Surly 8-Pack Rack
$130.00
Most of you don’t need the cargo capacity to land a helicopter on your rack. Sometimes, all you want to do is grab a sixer from the beer store on the way home, or pick up a nice bouquet of flowers. For whatever the situation dictates, Surly offers the 8-Pack Rack. Made from the same tubular cromoly steel as their front and rear touring racks, the 8-Pack Rack is a solid pedestal upon which you may rest a handlebar bag, grocery bag, minaudiere, satchel…or whatever you use to carry your bowling ball around. The 8-Pack Rack attaches to most forks with mid-blade and crown eyelets. It uses stainless steel hardware and has the characteristic durability, versatility, and repairability all Surly products are known for. The 8-Pack Rack has lots of barrel braze-ons, so you can customize your cargo tie-downs…or just bolt on as many lights as you can possibly find. It’s rated to carry up to 30lbs (13.6 kg) and comes in black or silver.
Surly Front Rack
$145.00
Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g
Surly TV Tray
$65.00
We designed the Surly TV Tray to help riders boost the capacity of their current rack setups. Designed for easy pairing with nearly all Surly racks and most other racks on the market, mount this sturdy aluminum platform on top of your current rack to provide a footprint large enough for 30 lbs. of beef jerky, 9-volt batteries, used pinball parts, or whatever else you might need to haul. Available in dark black. - Load weight limit 30 lbs. - 15-3/8 x 10-inches - Rack weight 650g - 6061-TB Aluminum - Not compatible with Surly 24-Pack Rack or Wide Rear Disc Rack - Mounting Hardware Included
Salsa Down Under Front Rack
$65.00
• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets
Salsa EXP Series Anything Cage HD
$34.99
The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)
Salsa Wanderlust Rear Rack
$99.00
Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.
Portland Design Works Loading Dock Rear Rack
$85.00
You'll be amazed by how much cargo you can transport with your very own Loading Dock. This attractive rear rack from Portland Design Works isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support up to 35 pounds so you can load 'er up with all the essentials. - Lightweight aluminum tubing - Double ply bamboo deck - Deck measures: 140 x 381 mm (5.5 x 15") - Height: 368 mm (14.5") - Weight: 2 lbs - Rated to 16 kgs (35 lbs)
MSW RCR-100 Pork Chop Lite
$30.00
When it's time to ditch the backpack, the back soreness and the back sweat, look no further than the MSW Pork Chop Light Duty rack. It's got plenty of capacity for those key items on your journey. - W-bend stays keep pannier hooks in place - Fits most bikes with 26" - 700c wheels - Designed for bikes without disc brakes (for disc brake bikes, see RCR-100D) - Holds up to 40 lbs. of cargo - Top platform dimensions are 310mm x 112mm
MSW RCR-100D Pork Chop Lite Disc
$40.00
When it's time to ditch the backpack, the back soreness and the back sweat, look no further than the MSW Pork Chop Light rack. It's got plenty of capacity for those key items on your journey. This model is designed to fit bikes with disc brakes. - Fits bikes with disc brakes: offset with integrated spacer - W-bend stays keep pannier hooks in place - Holds up to 40 lbs. of cargo - Top platform dimensions are 310mm x 112mm
MSW RCR-200 Pork Chop Heavy Duty
$70.00
Lightweight aluminum tubing, stainless steel hardware, and fully adjustable upper stays make the Pork Chop rack a durable addition to any bike. - Fits most 700c cantilever and disc brake bikes - Tubular aluminum construction, 10mm diameter - Stainless steel hardware - Fully adjustable upper mounting brackets - W-bend at bottom of rack for easy on-and-off of hook-style panniers - Platform Dimensions: 10.75 x 4.88" - Weight: 650g - Weight Limit: 40 lbs.
Wald 215 Rear Rack
$35.95
Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds
Topeak BabySeat II Rack
$54.95
Topeak's tubular aluminum rack allows you to easily mount your BabySeat II or your Topeak MTX TrunkBags (both sold separately) to your bicycle. So go ahead and bring your favorite little passenger or gear along for the ride.
Topeak BabySeat II Rack (Disc Mount)
$54.95
Topeak's Disc-Mount Rack allows you to easily mount your BabySeat II or your Topeak MTX TrunkBags (both sold separately) to your bicycle. And, this tubular aluminum rack features tabs that clear most disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger or extra storage room.
Topeak Explorer 29er Tubular Rack w/Disc Mounts
$64.45
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap onto your big-wheeled bike. It's made of tubular aluminum, fits most bikes with disc brakes, hauls up to 55 pounds and has a center strip that acts like a short fender. It's compatible with Topeak's QuickTrack bags and accessories (sold separately), too.
Topeak Explorer Tubular Rack
$51.45
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender, too.
Topeak Explorer Tubular Rack w/Disc Mounts
$58.45
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too.
Topeak MTX BeamRack
$65.95 - $69.95
Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
Topeak Tetrarack R1 Front Gravel/Road Bike Rack
$135.45
The perfect quick-mount front rack system for road, cross, hybrid or touring bikes with rigid forks. This one-size-fits-all front rack features an innovative top plate that adjusts to levels independent of the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. - Attachments: Fork with hook-and-loop straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags - Max Load: 7kg / 15lb - Clamp for front reflector, tail light mount - Size: 33 x 29. 3 x 12cm / 13" x 11.5" x 4.7" - Weight: 840g / 1.85lb
Soma Porteur Front Cargo Rack
$222.45 - $274.45
- Full chromoly construction specifically designed for 700c bicycles - Mounts to hub axle for universal fitment - Adjustable height with lower horizontal strut for fitment of a small bag or pannier - Deck provides ample cargo space at 14.25"X12" - Optional stylish fence available separately
Soma Porteur Front Fence
$73.95
- Full chromoly construction specifically designed for 700c bicycles - Mounts to hub axle for universal fitment -Adjustable height with lower horizontal strut for fitment of a small bag or pannier - Deck provides ample cargo space at 14.25"X12" - Optional stylish fence available separately
Portland Design Works Takeout Front Basket w/Roll-Top Bag
$115.00
Get it to go with Portland Design Works' Takeout Basket. This handsome rack attaches to your handlebars for easy access to the included waterproof, removable roll-top bag. The rack is made from light, sturdy aluminum tubing and includes thoughtful features like an eyelet for mounting a light and a slot for carrying your u-lock (both sold separately). - Conveniently carry a six pack of bottles, five burritos, three chinchillas or an extra layer of clothing - Fits 25.4 - 31.8mm handlebars (even fits between drop bars) - Includes water resistant roll top bag that clips securely into basket - Eyelet for attaching light mount - Integrated u-lock carrying slot - Rugged, lightweight 10 mm alloy tubes - Rack weight: 500 grams - Inside of basket dimensions: 155mm x 255mm x 105mm - Lifetime PDWarranty
Planet Bike Eco Rack
$41.45
Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.
Planet Bike K.O.K.O. Cargo Rack
$50.95
You'll keep on keepin' on with Planet Bike's K.O.K.O. Cargo Rack on your bike. Made of 6061 aluminum for maximum strength and stability, it boasts a wide range of adjustability so it's easy to install and fits most bicycles. There's a taillight mount, too (lights sold separately).
Planet Bike Versa Rack
$52.95
Planet Bike's Versa Rack means your steed with disc brakes can finally be made into a rack-packing workhorse. It's 6061-aluminum construction provides maximum strength and stability. Thanks to the clever design you'll have complete heel clearance when you install packs. Plus, the pre-installed rack hardware makes it a cinch to mount the Versa Rack to your bike.
Evo Randy Rear Rack
$49.99
- Oversized AL-6061 tubular alloy rack 10mm tubing - Top surface width: 90mm to 128mm - For 26-inch / 700C wheels (max tire 29 x 2.1-inches) - Max capacity: 20kg - Features T-Bar (patent-pending): two adjustable arms move independently from the rack structure and to keep the rack parallel to the ground regardless of frame type or size - Sets rack 6cm behind the axle for improved heel clearance - M5 threaded holes on dropouts to mount a rear fender straight onto the rear rack
Basil Front Carrier
$69.45
- Robust and large front carrier - With stays for mounting on front axle, includes 2 handlebar hooks (for 21-31.8 mm). - Maximum 10kg
Axiom Flip-Flop LX Seatpost Rack
$53.95
Axiom's Flip-Flop LX Seatpost Rack is perfect for hard-to-fit bikes like full-suspension models, ones with disc brakes and those without frame eyelets. This easy on/off quick-release rack is made of light and strong hand- and double-welded tubular 6061 T6 aluminum and it boasts a flip-flop support arm for mounting the rack in a high or low position, which lets it fit on most bicycles. There's ample carrying capacity with a spacious top platform that's perfect for trunk bags (sold separately). You can even slide off the platform with a trunk bag for convenience, and slide the platform in when not in use so it takes up less space. One rack to fit any bike: A seatpost rack whose support mast can be flipped to a high or low position to accommodate different frame designs. - Hand-welded, tubular 10.2mm 6061 T6 aluminum. - 6061 T6 aluminum support beam. - Quick-release bracket fits 25.4 – 33 mm alloy or steel seatposts. *Not recommended for carbon seatposts - Patented FLIP-FLOP® system allows you to optimize the shape and position of your rack on almost any bike. - Quick-release levers allow pannier-compatible platform to be removed - Double welded for extra strength and long-term durability. - Reflector/light mount
Portland Design Works Bindle Rack
$88.00
The Portland Design Works Bindle Rack is a seatpost-mounted rack designed to easily haul your gear on multi-day cycling tours or just across town. The rack is constructed of lightweight alloy and mounts to any size seatpost in seconds. Heavy-duty compression straps loop through saddle rails to carry your cargo. The Bindle Rack helps to prevent side-to-side sway while riding and rear wheel rub for riders with short seat posts. Place your tent, sleeping bag, drybag, or other gear directly onto the Rack platform and pull the compression straps tight to secure the load up against the bottom of your saddle. - Rack mount fits seatposts with diameters 22.0 - 31.6mm - Rack deck measures 133 x 343mm (5.25 x 13.5") - Total Rack length: 432 mm (17") - Rack weight: .35kg (13 ounces) - Rated to 5.34kg - Lifetime PDWarranty
Page 1 of 2 Next page