Tools

Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.

To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!

Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.

Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent

Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.

• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers

Park's BBT-18 is a heavy duty, investment cast tool for installing and removing all Shimano, ISIS Drive, and ISIS Overdrive 8-notch bottom bracket cups.

An economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout, the TW-1.2 is intuitive and easy to use, and applies up to 14 Nm of torque to any fastener or component with left or right-handed threads. Perfect for low-torque applications such as stem bolts, levers, and carbon fiber components. 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet. - 0 to 14 Newton meter (0 to 140 inch-pound) range - 3/8" drive - Reads and registers torque values for both left hand and right hand threading - Length: 11.5" (292 mm)

Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!

Park's Heavy-Duty Tire Levers handle the toughest tire-and-rim combinations including difficult downhill and freestyle tires. Their specially designed tips engage the tire bead so it can be removed with just two levers. Plus, these beefy, forged-steel levers are a full 8-inches long for superior leverage.

A great way to hold small parts, tools and components during a repair, Park Tool's Benchtop Overhaul Mat features multiple small pockets and one large work area. It's perfect for suspension work or to organize parts for installation. • Made of a rubber-like PVC • Cleans easily and looks great on any bench • Measures: 14.7” x 7” (38cm x 18cm)

Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information: - 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard. - 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard. - 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone. - 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter. - 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor. - 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.

Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

The CRS-15.2 uses two different insert rings to install bearing races on the 1.5-inch and 1-1/4-inch forks. The bearing surface is spared a direct hit by using aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. Included extension allows work on fork steering tubes up to 425mm. - SHIS terminology: The CRS-15 services crown races in SHIS 33 and 40.

Made from high precision, hardened Cro-Moly steel, Park's Bottom Bracket Tool (External Bearing) can be turned with a 3/8" drive wrench, 1" wrench, or Park Tool FRW-1 Freewheel Remover Wrench (each sold separately).

Take the mess out of tubeless tire setup and removal. The TSI-1 enables you to inject the perfect amount of sealant directly into mounted tubeless tires through the valve stem without removing the bead from the rim. The long, thin tube is able to fit all the way through many Presta stems with removable valve cores, for tidy injection and removal of all injectable tubeless bicycle tire sealants. Features an oversized syringe body with easy-to-read gauge for precise application of sealant. - Syringe capacity: 3.5 fl. oz. (100 cc) - Tube dimensions: 120mm (4.75"") long x 3.5mm (0.14"") diameter NOTE: some tubeless valve stems feature an opening that is smaller than the tube of the TSI-1. In these cases, the bead must be removed from the rim in order to remove sealant from the tire.

Park's AWS-8 Hex Wrench Set features Bondhus balldriver ends, which facilitate use when the tool is at an angle to the bolt. This is great for working in hard-to-reach areas, such as reaching water-bottle-cage screws. The AWS-8 has 4, 5, and 6mm wrenches, which are the most common bicycle bolt sizes. Plus, its Y shape and vinyl coating provide excellent leverage and comfort.

Improperly aligned frame or fork dropouts can cause bent axles and quick-release skewers, as well as tracking and shifting problems. The Frame and Fork End Alignment Gauge Set quickly determines whether the frame or fork dropouts are aligned and parallel. If an error is detected, long handles and comfortable molded grips afford plenty of leverage for straightening. These Park gauges adjust to compensate for various hub widths from 100mm to 160mm, too.

The I-Beam Mini Fold-Up Set includes 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen and regular screwdriver. It's the perfect mini-tool to get you out of binds or make quick adjustments. And, it conveniently tucks into a pocket or pack.

Never be left looking for an errant wrench when you have Park's Metric Wrench Set. It includes 12 high quality Park metric wrenches from 6 to 17mm in diameter, featuring both box and open ends. They are all forged from chrome vanadium steel, then chrome plated for durability and dipped in Park Tool blue vinyl for outstanding comfort and ease of use.

Park's Offset Brake Wrench utilizes a unique design that allows it to reach into tight areas that other wrenches cannot. The OBW-3 features a 14mm wrench on one end and the other end fits into a brake's tension springs to rotate the brake around its bolt for proper alignment. The OBW-4 features 10-, 11-, 12-, and 13-mm opening to fit most models of sidepull brakes.

Park's Threadless Star Nut Setter makes it quick and easy to install star-fangled nuts used with 1-inch and 1-1/8-inch threadless headset systems. Using a durable steel driver and built-in guide, the TNS-4 perfectly aligns the star-fangled nut and sets it to the proper depth every time. Plus, the unique design virtually eliminates pinched fingers!

Professional quality ring plier made from forged, heat-treated cro-moly steel with a return spring and vinyl dipped grips. The RP-5 has 1.7mm tips on straight blades for small, internal snap rings. The tips open from 22mm to 0 (tips touching).

Keep your most commonly used tools close at hand with this clever, multi-function tool holder. The TK-4T was painstakingly designed with pockets and holders for specific tool shapes and sizes as well as some generic storage areas. The Tool Kaddie rotates for easy access and is molded from a durable composite material. - Bench Top Mount sits firmly on any flat surface - Specific slots and holders for 3-way hexes, screwdrivers, P-Handles, pliers/cutters - Generic slots and holders to hold a wide variety of tools and small parts - Mounting location to directly attach HXH-2P or HXH-2T P-Handle Holders (sold separately) - Built-in receiver port for PTH-1 Paper Towel Holder (sold separately)

A fast and convenient tool to remove and install 12-spline Shimano/SRAM style cassette lockrings, as well as similar lockrings on rotor discs. The FR-5H features a modified FR-5 tool that allows use without removing most quick release skewer nuts. The removable, threaded steel handle makes it possible to replace a worn or damaged head. - Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette lockrings - Also fits some Shimano disc brake lockrings

Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. - Carefully selected combination of Chrome Vanadium and S-2 tool steels - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Sliding T-handle creates increased leverage and multiple access positions

The small and handy RR-12.2 Tape Measure features a tough composite housing with an integrated belt clip and both metric and SAE readings up to 350 centimeters or 12 feet. Measurement can be locked in place using the thumb lock or the handy quick-stop button. - RR-12.2 features a new body design with a handy-quick stop button on the bottom, allowing the user to temporarily lock the tape into place with their index finger - Maximum length: 350 cm | 12 ft. - Markings: 1 mm | 1/32" (up to 6") | 1/16" (over 6") - The RR-12.2 features a new body design with a handy-quick stop button on the bottom, allowing the user to temporarily lock the tape into place with their index finger - Metric and SAE readings up to 350 centimeters or 12 feet - Markings: 1 mm | 1/32" (up to 6") | 1/16" (over 6")

The DC-2 is a vernier caliper for accurately measuring seat posts, head tubes, bearings, spoke diameters, and other components, featuring a large LCD screen for accuracy and ease of use. The tool’s ability to measure in metric and inches in external, internal, depth, and stepped dimensions make it an indispensable shop tool. - Range: 150 mm | 6" - Resolution: 0.01 mm | 0.0005" - Accuracy: +/- 0.02 mm | 0.001" - Repeatability: +/- 0.01 mm | 0.0005" - Measures external, internal, depth, and stepped dimensions - Uses LR44 batteries

Park's AV-1 Axle Vise makes repairing and overhauling hubs easier than ever. It prevents your axle from spinning while work is done on the hub and it has two different size receptacles so it will work with both front and rear axles.