Parts & Accessories

Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt

Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.

Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS

**Only compatible with SL Sprint Stem (4 bolt)** Zipp’s QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes, system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. The Zipp QuickView Integrated mount will have two variants, one compatible with Service Course, Service Course SL, and SL Speed models, and another designed for use with the SL Sprint. This is an easy way to add elegant integration to your road bike. FEATURES -Computer compatibility: Garmin™, Wahoo™ -Accessory compatibility: GoPro™ -Lights: Niterider Lumina Series™ (with adapter), Light and Motion™, Bontrager™ (with adapter), Gloworm™ (with adapter), Lezyne™ (with adapter), Infini™ (with adapter), Sigma Sport™ -Lifetime warranty

• When aerobar space is tight, place your computer on top • Tuck straw on either side for best aerodynamics • Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately) • Compatible with most computers, including large screens (sold separately) • Glass-reinforced nylon • Weight: 18.5 grams

Telescoping Garmin Computer Mount for Versa Plates. Raise the computer up for Refill Bottles, or lower it down to clear Standard Bottles. On-the-go tilt adjust to avoid glare. - Telescoping computer mount makes for a seamless switch between Refill or Standard Bottle - Compatible with Garmin bike computers and Multisport Watches - Requires Versa Carbon Mount or Versa Aluminum Mount Telescoping Garmin-Specific Computer Mount - Raise the computer mount up to tuck in a Refill Bottle for race day, or seamlessly lower it down for a Standard Bottle to maintain the optimal view for training days. Compatible with Garmin bike computers and multisport watches. On-the-Go Computer Tilt Adjust - Avoid changing glare with a tilt mechanism for easy adjustments while you ride Arrives Fully Assembled - Few steps required to install and head out on your first ride - Weight: 1.9oz (54g) - Construction: Nylon Composite Includes - Fully assembled computer mount - 2 screw sets: one for Versa Carbon Plates, and one for Versa Aluminum Plates Warranty: Limited Lifetime

Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)

Replacement charging clips and Y-shaped cable for the POWRLINK ZERO Power Pedal System In the box - Y-shaped charging cable - Charging clips (x2)"

Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes

The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes

All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes

Voltaic Systems - Charge Batteries For Dynamo Hubs! Are you going to head out to the back country with some janky USB charging battery you found on eBay or at the checkout aisle of a discount store? Hope not. Pick out the ultimate charging solution designed to optimize your dynamo charging situation--Voltaic Systems. These units are manufactured to high specifications and provide the exact amount of storage advertised. The Voltaic line of USB charge batteries is one of the few on the market that have three key factors that are important in a dynamo charging bikepacking scenario. The units are designed to accept a trickle charge like you see on dynamo hubs, offer pass through charging (provides outflow from the battery at the same time the battery is being charged), and provide low-current flow with no automatic shut off (this is critical for some low-draw GPS devices, like the Garmin eTrex). I use a voltaic when I'm out bikepacking. During the daytime, I keep the light off on my kLite so that all of the dynamo power flows into the kLite dual USB charger. I then run a lead from the kLite charger to the Voltaic battery, and if any of my devices are running low, I'll charge them up with USB leads from the Voltaic. This uses the pass through charging feature. When night falls, I flip the kLite ULTRA lamp on, unplug the Voltaic battery, and then run the charging lead directly into my GPS. This uses the low-current flow / no automatic shut off feature and balances the dynamo power between the light draw from the GPS and the higher draw from the lamp. Three units are available - all three have identical operation and vary only in capacity, size, and weight. All three offer: two charging inputs (USB-C - 5V/2A and MicroUSB -5-6V/2A) two charging outputs (USB-A x 2, 5V/2A , 3A max LED charge indicator Battery Type: Li-Ion Protection: Short circuit over charge, over discharge, over temperature (35? Input Cutoff, 45? Output Cutoff), under temperature (0? Input Cutoff, -20? Output Cutoff) Safe for air travel, carry on luggage only Specifications for the V25: 7.7 x 7.8 x 2.6 cm 160 grams Capacity: 6,400mAh, 23 Watt Hr Specifications for the V50: 11.4 x 7.8 x 2.6 cm 272 grams Capacity: 12,800mAh, 47 Watt Hr Specifications for the V75: 15 x 7.8 x 2.6 cm 382 grams Capacity: 19,200mAh, 71 Watt Hr

Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz

An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices. - Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount - Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series - Material: aluminum / fiberglass composite - Max load: 220g - Weight: 40g (120mm) / 45g (150mm) - Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)

This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

• Fits head & derailleur tubes to mount accessories on a USS (under-seat steering) recumbent

The Sinewave Cycles Revolution is a bicycle dynamo powered USB charger. It converts electricity generated by hub and bottle dynamos to USB output. The Revolution allows users to charge USB-powered devices while riding. The Revolution is made in the USA. UNLIMITED POWER FOR: Cell Phones GPS Battery Packs Rechargeable Headlights Rechargeable Speakers Any USB-powered device! FEATURES: Best in class efficiency High Speed Overload Protection Simple Installation Shock and vibration toughened Waterproof Gold-plated USB connector won't rust or corrode SPECIFICATIONS: Starts charging at 3.5 MPH (5.5 km/h) Full charging at 9 MPH (14.4km/h) Max current: 1 Amp Also works with DC input up to 52V Weight: 37 grams Dimensions: 54mm x 35mm x 14mm Wire length: 36" (91 cm) (contact us if your setup requires a longer wire) Wire ends: Stripped wire WARRANTY: 1 year (we've been abusing ours for 3 years with zero issues) REVOLUTION FAQ WHAT DEVICES CAN I CHARGE WITH THE REVOLUTION? The Revolution output is a standard USB charger (5V), and can provide up to 1 Amp. If your device can charge from a standard USB connector, it should be able to charge from the Revolution. This includes iPhones®, smartphones, GPS devices, USB battery packs, headlights, rechargeable speakers, etc... HOW FAST DO I HAVE TO RIDE TO CHARGE MY PHONE? With a hub generator, charging starts at only 3.5 MPH (5.5 km/h), although this can depend on your device's ability to trickle charge. At only 9 MPH (14.4 km/h), charging is as fast as a wall-powered charger. WILL I DAMAGE THE REVOLUTION WHEN I RIDE TOO FAST? No, you will not. Many dynamo-powered electronics suffer from this problem. Even products that claim to be “protected” will actually draw extra power and heat up when you go faster than about 20 mph (35 km/h). The Revolution has a novel, integrated protection circuit that will not draw extra power or heat up at any speed. IS THE REVOLUTION WEATHER RESISTANT? Yes. The Revolution can be left on your bike in the rain. Click here to see the Revolution working under water! HOW CAN THE REVOLUTION BE SO WATERPROOF WITH AN OPEN USB CONNECTOR? First, the electronics are fully encapsulated in epoxy. This means that water can not touch any of the components, even if it gets past the connector. Second, the USB connector itself features gold plated contacts that will not rust or corrode. CAN THE REVOLUTION STAND UP TO SHOCKS, VIBRATIONS, AND OFF-ROAD RIDING? Yes. The electronics are fully encapsulated in epoxy. In addition to providing complete protection from the elements, this makes the Revolution extremely resistant to bumps and vibrations. WHY DOES IT TAKE 15 SECONDS FOR CHARGING TO BEGIN? Some devices, such as the iPhone®, require a minimum amount of power to charge correctly. If charging begins before input power is sufficient, the device may refuse to charge. The 15 second delay gives you time to reach a minimum speed. This allows you to charge an iPhone® or other devices that would not otherwise charge correctly. HOW DO I MOUNT THE REVOLUTION TO MY BIKE? The Revolution can be mounted anywhere on the bike with the included zip-tie. If you plan to often install and remove the Revolution, we recommend using a reusable zip-tie. Alternatively, the Revolution is small enough that it can easily be placed in a pannier or handlebar bag. DOES THE REVOLUTION HAVE A BUILT-IN BATTERY? No - and this is a good thing. Most chargers that include a "cache battery" do so because they are not efficient enough to directly charge a phone - they must slowly charge a battery, then charge the phone from the battery. This adds further inefficiency to the system, as well as a delay while the internal battery is charged. The Revolution is able to directly charge your phone, making the cache battery unnecessary. Some chargers have a larger built-in battery, meant to store a large amount of energy. There are several reasons we don't like this system: Product lifetime. Batteries wear out. Even the highest quality lithium ion battery is rated for about 3 years from manufacturing, independent of how much you use it. There's nothing in the Revolution that wears out. When you build up a touring bike you select parts based on reliability and durability first, and everything else second. We want the Revolution to be the same way. Efficiency. The extra steps to charge the battery, then use the battery to power the output is a significant hit on efficiency. Most users directly charge their phone, and the extra conversion steps mean wasted energy. Flexibility. A product with an internal battery is stuck with that one battery, which may be too small for some users and too large for others. There are many USB battery packs available in all sorts of shapes and sizes and capacities. The freedom to use a battery that fits your bike and your tour is lost when an internal battery is used. This also allows the Revolution to be as small as possi

FEATURES: INTEGRATED USB CHARGER Charge your phone, GPS, or any other USB device directly from the Beacon; no need for a separate charger. FLEXIBLE POWER OPTIONS An external, off-the-shelf USB battery pack can be connected to maintain bright, flicker-free light even when stopped or riding slowly. Any available dynamo power replaces battery power until reaching a speed when all power is provided by the dynamo and the battery is no longer used. 750 LUMENS Lots of light, suitable for any style of riding. SYMMETRICAL BEAM PATTERN Ideal choice for off-road riding. SUPERIOR BRIGHTNESS AT LOW AND MEDIUM SPEEDS Dynamo power is optimized at low-to-medium speeds, reaching 200 lumens at just 5 MPH, 500 lumens at 8 MPH, 650 lumens at 10 MPH, and 750 lumens at 13 MPH. CHARGER PRIORITY MODE Intelligently balances power between light and charger to optimize simultaneous use. STANDLIGHT A supercapacitor, charged while riding, provides about 5 minutes of standlight when stopped. COLOR OPTIONS We are able to mix-and-match different colors for the front, middle, and back of the Beacon. Pick a combination that matches your bike or represents your country or team. Contact us about custom colors. MOUNTING OPTIONS The 10mm mounting tab is compatible with mounting hardware from B&M, Supernova, Schmidt, etc. COMPACT DESIGN L x W x H - 58 x 42 x 42mm 115g (includes 36" dynamo wire) TAILLIGHT OUTPUT A taillight output is available and is controlled by the headlight. Taillight compatibility information can be found here. BETTER COLOR TEMPERATURE While still in the "cool white" range, the Beacon generates slightly warmer light than other LED headlights. This results in less glare, less strain on your eyes, and does a better job reproducing natural colors. WEATHERPROOF Designed to be used in any conditions. Multiple seals protect against water ingress, electronics are potted in epoxy, and all connectors are gold plated and designed for resistance to the elements. MADE IN THE USA All Sinewave products are made in the USA. The Beacon is the only commercially available dynamo light made in the USA. WARRANTY 3 years WHAT'S IN THE BOX? The Beacon comes with a USB-to-DC cable. A mount is not included - there are many options available for different mounting locations. Contact us if you need advice about mounting options. A right-angle USB extension cable is also available. WHAT INPUT POWER OPTIONS ARE AVAILABLE? The Beacon can be powered by a dynamo, an external USB battery pack, or both. An external USB battery can be connected using the barrel connector on the back of the light. A USB-to-barrel cable is available. The external battery will maintain high brightness and steady output, even when stopped. When you begin riding, the power from the dynamo will begin to replace the power from the battery until you reach a speed where the dynamo is able to provide all of the power, and the battery is no longer used. When you slow down the light resumes using the battery so the beam doesn't dim or flicker. HOW DOES THE INTEGRATED USB CHARGER WORK? The Beacon includes circuitry from our Revolution and Reactor chargers. The USB output is available from a standard USB-A connector on the back of the light. Connect your device directly to the USB port, or use a USB extension cable and put the connector anywhere you want. IS THE USB CHARGER ALWAYS ENABLED? Yes. The USB charger is enabled whether the light is on or off. When the light is off, all the power from the dynamo can be used by the charger. When the light is in Charger Priority Mode, a small amount of power will first be used by the light and the remainder will be available to the charger. It is not recommended to use the charger while the light is in high brightness mode. WHAT IF I HAVE LIMITED CLEARANCE BEHIND THE HEADLIGHT? We have space-saving right-angle cables available. These cables also allow the wires to easily follow the mounting hardware for secure wire management. WHAT IS CHARGER PRIORITY MODE? Other setups with a separate headlight and charger can do both at the same time, but the two devices are not designed to share power from the dynamo - the headlight can dim or flicker, depending on the power used by the charger, and the charger will require a faster speed to make up for the power used by the headlight. Since the Beacon includes both the light and charger, they do a better job of working together. Using Charger Priority Mode, the headlight will always maintain at least a reduced output - sufficient for a daytime running light or commuting on a lit street or path. The charger gets priority to all remaining power, meaning your USB device will charge at much lower speeds because only a small, limited amount of power is used by the light. Once sufficient power is available to the USB device, any additional power from the dynamo will be used by the light. If your device is unplugged or done charging, all power

Cutting edge aerodynamic and lightweight mount 3D Printed in Titanium compatible with all Garmin and Wahoo computers (except bolt v1). T-Tray mounting system makes for a removable mount for lights, cameras, and more! - Standard: 9 – 30mm - Wide: 23 – 40mm

Enjoy easy viewing with the Butler Out Front handlebar mount! Out Front Mount for following models: BC 1909 STS BC 2209 STS ROX 5.0 ROX 6.0 ROX 8 ROX 8.1 ROX 9 ROX 9.1 *Note: not for use with ROX 10.0

Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams

Shimano Di2 External Battery Mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware

Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware

The Shimano STEPS SC-E7000 Cycle Computer display unit provides expanded communication for bicycle data and is compatible with STEPS components - Computer can be customized through E-Tube Project application with smartphone and tablet - The low profile design is well-suited for mountain biking - Includes a 1.39" LCD display - 4 E-Tube ports

- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger

The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected). - Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series - Li-Ion type - Capacity: 500 mAH |3.7Wh (± 2000km autonomy) - Rated voltage: 7.4V - Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately) - Fixing small parts included - Weight: 52g

Connect your PC to CycleOps VirtualTraining.

The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g